Sökning: "fracture mechanics"

Visar resultat 26 - 30 av 250 avhandlingar innehållade orden fracture mechanics.

  1. 26. Computational modeling of oxygen-assisted fracture in nickel-based superalloys

    Författare :Kim Louisa Auth; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Stress-assisted diffusion; Intergranular fracture; Crack growth rate; Crystal plasticity; Moving boundary condition.; Crack propagation; Grain boundaries; Polycrystal;

    Sammanfattning : Nickel-based superalloys are a commonly used material in applications where high strength is required at high temperatures. A typical such example is jet engines and, in the case of polycrystalline nickel-based superalloys, components like turbine disks. LÄS MER

  3. 27. On crack growth under compressive stresses

    Författare :Per Isaksson; Mittuniversitetet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Ph.D. Thesis; Fracture mechanics; Cellulose and paper engineering; Cellulosa- och pappersteknik; Hållfasthetslära;

    Sammanfattning : This thesis concerns fractures subjected to compressive stresses. In the four papers appended fracture behavior in brittle as well as ductile materials is studied. LÄS MER

  4. 28. Modeling of cast iron materials related to machining

    Författare :Goran Ljustina; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Machining simulation; Microstructure; Fracture; Johnson Cook plasticity;

    Sammanfattning : A microstructure level simulation model of cast iron machining based on micrograph image analysis has been developed. The simulation tool has been developed for theorthogonal machining process involving 2D representations of a range of cast iron microstructures. LÄS MER

  5. 29. Fatigue crack growth experiments and analyses - from small scale to large scale yielding at constant and variable amplitude loading

    Författare :Pär Ljustell; Fred L. Nilsson; Bo Alfredsson; Gunnar Härkegård; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Fracture mechanics; fatigue crack growth; finite elements analysis; small scale yielding SSY ; large scale yielding LSY ; low cycle fatigue LCF ; crack tip opening displacement CTOD ; crack closure; potential drop method; constant amplitude load; variable amplitude load; inconel 718; stainless steel 316L;

    Sammanfattning : This thesis is on fatigue crack growth experiments and assessments of fatigue crack growth rates. Both constant and variable amplitude loads in two different materials are considered; a nickel based super-alloy Inconel 718 and a stainless steel 316L. LÄS MER

  7. 30. Finite element procedures for crack path prediction in multi-axial fatigue

    Författare :Dimosthenis Floros; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Fracture mechanics; Configurational forces; Mixed-mode; Numerical simulation; Rolling contact fatigue; Plasticity;

    Sammanfattning : Rolling Contact Fatigue (RCF) cracks in rails are among the most detrimental railway track defects regarding reliability and cost. The cracks typically grow in shear mode up to a certain length at which they might arrest or kink into a more tensile-driven growth. LÄS MER