Sökning: "nozzle"
Visar resultat 6 - 10 av 177 avhandlingar innehållade ordet nozzle.
6. Fundamental Mathematical Modeling of Gas Injection in AOD Converters with Emphasis on the Inlet
Sammanfattning : The overall purpose of the present work has been to developa novel mathematical model of the gas injection in the AODconverter process, based on fundamental transport equations.The model development was divided into two major steps, wherethe first step involved modeling of gas injection through acylindrical nozzle at high gas flow rates (the nozzle model). LÄS MER
7. A Study of the Initial Mould Filling during Up-hill Ingot Casting
Sammanfattning : The fluid flow in the mould during up-hill teeming is of great importance for the quality of the cast ingot and thereby the quality of the final steel products. At the early stage of the filling of an up-hill teeming mould, liquid steel flows with a high velocity from the runner into the mould. LÄS MER
8. Modeling of Gas Flows in Steelmaking Decarburization Processes
Sammanfattning : The purpose of the current study is to increase the understanding of different steelmaking processes at the decarburization stages by use of mathematical modeling. More specifically, two De-Laval nozzles from a VOD (Vaccum Oxygen Decarburization) process, which is used for producing stainless steels with ultra-low carbon grades, was investigated for different vessel pressures. LÄS MER
9. A Linearized Navier-Stokes Equations Methodology for Aeroacoustic and Thermoacoustic Simulations
Sammanfattning : Aeroengine noise is one of the dominating noise sources in today’s aircraft. Reduction of the aeroengine noise is related to multiphysics phenomena, and that is subject to different mechanisms, e.g., the coupling between turbulence, flame and sound waves. LÄS MER
10. Mass Spectrometry with Electrospray Ionization from an Adjustable Gap
Sammanfattning : In this thesis the fabrication and analytical evaluation of two new electrospray emitters utilized for mass spectrometry analysis is presented. The emitters are based on a new concept, where the spray orifice can be varied in size. The thesis is based on two papers. All present-day nanoelectrospray emitters have fixed dimensions. LÄS MER