Sökning: "KCl-induced corrosion"

Visar resultat 1 - 5 av 7 avhandlingar innehållade orden KCl-induced corrosion.

  1. 1. High Temperature Corrosion Behavior in Biomass- and Waste-Fired Boilers - Insights into catastrophic corrosion and corrosion mitigation techniques

    Författare :Julien Phother Simon; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; 3D tomography; TEM; Sulfur Recirculation; Waste; High-temperature corrosion; Biomass; Coatings; Stainless steel; Ni-based alloys; Deposits; KCl-induced corrosion;

    Sammanfattning : Carbon dioxide is contributing to the greenhouse effect and a significant part comes from the use of fossil fuels. Utilizing more renewable fuels is therefore a solution to decrease the net release of CO2 emissions to the atmosphere. LÄS MER

  3. 2. High Temperature Corrosion of Some Stainless Steels

    Författare :Carolina Pettersson; Chalmers tekniska högskola; []
    Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; oxidation of stainless steel; alkali induced corrosion; KCl induced corrosion; Sanicro 28; chromate formation;

    Sammanfattning : The high temperature corrosion of the alloy Sanicro 28 (35Fe27Cr31Ni) is addressed in this thesis. The influence of water vapour and two potassium-containing salts was investigated. In addition, three other alloys were studied. Polished steel coupons were isothermally exposed in tube furnaces at 600–800°C in 5% O2 and in 5% O2 + 40% H2O. LÄS MER

  4. 3. The High Temperature Corrosion of Alloy Sanicro 28

    Författare :Carolina Pettersson; Chalmers tekniska högskola; []
    Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; alkali induced corrosion; chromate formation; Sanicro 28; oxidation of stainless steel; KCl induced corrosion;

    Sammanfattning : This thesis investigates the influence of potassium chloride in solid and gaseous form on the oxidation of alloy Sanicro 28 (35Fe27Cr31Ni). KCl induced corrosion of chromia forming alloys is important e.g. in fireside corrosion in biomass and waste fired power plants. LÄS MER

  5. 4. High Temperature Corrosion of FeCrAl Alloys: The influence of water vapour and alkali salt

    Författare :Niklas Israelsson; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; pre-oxidation; FeCrAl; kinetics; high temperature corrosion; KCl; water vapour; alumina; oxidation;

    Sammanfattning : The corrosive environment in biomass- and waste-fired boilers has been known for several years. The traditionally used FeCr and FeNiCr steels show limited performance in the aggressive environment that contains more H2O and alkali salts than traditional fuel. LÄS MER

  7. 5. High Temperature Oxidation and Chlorination of FeCrAl alloys

    Författare :Niklas Israelsson; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; KCl; pre-oxidation; FeCrAl; H2O; high-temperature corrosion; kinetics;

    Sammanfattning : AbstractThe constant strive for improved efficiency and lower-cost industrial processes often results in progressively higher temperatures and more aggressive environments. High- temperature corrosion is a well-known problem in biomass- and waste-fired boilers and is one of the obstacles to overcome in achieving a more sustainable society. LÄS MER