Sökning: "Cylindrical pipes"
Hittade 5 avhandlingar innehållade orden Cylindrical pipes.
1. Modelling crack-induced ultrasonic scattering in a thick-walled pipe
Sammanfattning : Ultrasonic testing is used in several industries where there are high demands on safety, e.g. nuclear power and aerospace industries. In the nuclear industry and elsewhere there are many pipes that need to be tested. LÄS MER
2. Investigation of Thermal Performance of Cylindrical Heatpipes Operated with Nanofluids
Sammanfattning : Nanofluids as an innovative class of heat transfer fluids created by dispersing nanometre-sizedmetallic or non-metallic particles in conventional heat transfer fluids displayed the potential toimprove the thermophysical properties of the heat transfer fluids. The main purpose of this study is toinvestigate the influence of the use of nanofluids on two-phase heat transfer, particularly on thethermal performance of the heat pipes. LÄS MER
3. Experimental Study of Post-Dryout Heat Transferin Annuli with Flow Obstacles
Sammanfattning : An experimental study on post dryout heat transfer regime in annuli with flow obstacles was conducted in the High-pressure Water Test (HWAT) loop at the Royal Institute of Technology in Stockholm, Sweden. An annulus consisting of two concentric heated pipes (12.7x24.3) mm, with total heated length equal to 3650 mm was employed as a test section. LÄS MER
4. Improvements of U-pipe Borehole Heat Exchangers
Sammanfattning : The sales of Ground Source Heat Pumps in Sweden and many other countries are having a rapid growth in the last decade. Today, there are approximately 360 000 systems installed in Sweden, with a growing rate of about 30 000 installations per year. LÄS MER
5. An experimental study on streamwise streaks in transitional boundary layers
Sammanfattning : The present experimental study focuses on two topics, a passive transition-delay method for different types of wave disturbances and the effect of free-stream turbulence characteristics on boundary layer transition over a at plate. In the investigations, hot-wire anemometry was employed and the experiments were performed in a well-controlled wind tunnel facility. LÄS MER