Sökning: "leakage flux"

Visar resultat 16 - 20 av 29 avhandlingar innehållade orden leakage flux.

  1. 16. Linear wave energy converter : Study of electromagnetic design

    Författare :Erik Lejerskog; Mats Leijon; Giuseppe Passoni; Uppsala universitet; []
    Nyckelord :Wave energy; permanent magnets; linear generator; closed stator slots; offshore experiments;

    Sammanfattning : The thesis presents results from synchronous linear wave energy converters developed at Uppsala University. A study is done on closed stator slots and a study presenting offshore data focusing on the power absorption from a wave energy converter (WEC). LÄS MER

  3. 17. Aspects on Wind Turbine Protections and Induction Machine Fault Current Prediction

    Författare :Marcus Helmer; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; saturation; Induction generator; Short circuit currents; Slip ring Generator; skin effect;

    Sammanfattning : This thesis presents detailed modelling of the induction machine with the main objective being accurate fault current prediction. The thesis focus mainly on mains connected induction machines and the response due to severe disturbances in the supply voltage, such as three-phase short-circuit faults. LÄS MER

  4. 18. Design of Rare Earth Free Permanent Magnet Generators

    Författare :Petter Eklund; Sandra Eriksson; Leijon Mats; Marcus Berg; Oskar Wallmark; Uppsala universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; permanent magnet generators; electrical machine design; ferrite permanent magnet; Engineering Science with specialization in Science of Electricity; Teknisk fysik med inriktning mot elektricitetslära;

    Sammanfattning : Low speed permanent magnet (PM) synchronous generators (SGs) are commonly used in renewable energy. Rare earth (RE) PMs such as neodymium-iron-boron are a popular choice due to their high performance. LÄS MER

  5. 19. Application of 3-D Computation of Magnetic Fields to the Design of Claw-Pole Motors

    Författare :Sonja Lundmark; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY;

    Sammanfattning : The main advantage of claw-pole machines lies in their ability to yield higher torque density values than is obtainable from a conventional machine. However, the high torque density has its price; leakage flux is often high resulting in low power factor and efficiency. LÄS MER

  7. 20. Permanent-Magnet Synchronous Machines with Non-Overlapping Concentrated Windings for Low-Speed Direct-Drive Applications

    Författare :Florence Meier; Juliette Soulard; Zi-Qiang Zhu; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; electronic engineering; electrical engineering; Electrical engineering; electronics and photonics; Elektroteknik; elektronik och fotonik;

    Sammanfattning :  Many geared electric drives can benefit from removing the gearbox and driving directly the load at low speed using a permanent-magnet synchronous machine (PMSM). PMSMs with non-overlapping concentrated windings are particularly attractive in low-speed direct drives since they allow, among other advantages, a high number of poles with a limited number of slots. LÄS MER