Sökning: "water-atomized iron powder"

Visar resultat 1 - 5 av 7 avhandlingar innehållade orden water-atomized iron powder.

1. 1. Sintering of water-atomized iron and low-alloyed steel powder

   Författare :Johan Wendel; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; reduction kinetics; water-atomized steel powder; water-atomized iron powder; sintering; oxide reduction; surface analysis; dilatometry; surface chemistry; thermogravimetric analysis;

   Sammanfattning : Iron and steel powder grades are extensively used in the powder metallurgy (PM) industry for manufacturing of ferrous structural components, with a major customer in the automotive industry. The powder grades are predominantly manufactured by water-atomization, yielding powder particles with highly irregular morphology and good compressibility, making the powder ideal for the conventional press-and-sinter manufacturing route. LÄS MER

3. 2. Nanopowder as sintering aid for water-atomized ferrous powder

   Författare :Swathi Kiranmayee Manchili; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; master sintering curve; dilatometry; reduction kinetics; thermal analysis; compaction; nanopowder; surface oxide; hydrogen; sintering; water-atomized iron powder; water-atomized steel powder;

   Sammanfattning : Press and sinter powder metallurgy steels are cost-effective solutions for structural applications. There is a constant drive for improvement in the density of these powder metallurgy steels to expand their usage in high-performance applications. LÄS MER

4. 3. Characteristics and Sintering of Fine Water-atomized and Carbonyl Iron Powder

   Författare :Johan Wendel; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; sintering; powder metallurgy; iron powder; dilatometry; surface analysis; thermal analysis;

   Sammanfattning : Various types of iron powder are extensively used in the powder metallurgy (PM) industry. Water-atomized iron powder is commonly used as the base in many low-alloyed steel products manufactured through the conventional 'press and sinter' route, while carbonyl iron powder is often used for metal injection moulded (MIM) components. LÄS MER

5. 4. Surface Characteristics of Water Atomized Pre-alloyed Steel Powders and their effect on Sintering

   Författare :Dimitris Chasoglou; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; spinel oxides; sintering; Cr-pre-alloyed powder; reduction; sintering atmosphere; surface oxide; fractography; XPS; oxidation; AES; EDX; carbothermal reaction; SEM; Powder metallurgy;

   Sammanfattning : Powder Metallurgy (PM) is an efficient method, in terms of cost and raw material utilization, for the production of structural parts that have strict dimensional tolerances and complex geometries. In the common processing route, steel powder is fabricated by water atomization and then pressed and sintered into the final component. LÄS MER

7. 5. Role of nanopowder as sintering aid in the densification of water atomized ferrous powder

   Författare :Swathi Kiranmayee Manchili; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; surface oxide; sintering; nanopowder; thermal analysis;

   Sammanfattning : Press and sinter powder metallurgy (PM) steels are cost-effective solutions for structural applications. There is a constant drive for the improvement in the density of these PM steels which helps in expanding their usage in applications demanding higher performance than what they deliver today. LÄS MER