Sökning: "ultra low-voltage"

Visar resultat 6 - 10 av 11 avhandlingar innehållade orden ultra low-voltage.

1. 6. Waste-heat Recovery Using Thermoelectricity and Silicon Carbide Power Electronics

   Författare :Arash Edvin Risseh; Hans-Peter Nee; Torbjörn Thiringer; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Thermoelectricity; Power converter; Silicon Carbide; MOSFET; Power management; Thermoelectric generator; Renewable energy; Vehicle; Power electronic; Waste heat; Ultra-low inductance; Power module; Termoelektrisk energiomvandling; Kiselkarbid MOSFET; Effektomvandlare; Förnybar energikälla; Effektelektronik; Spillvärme; Effektmodul; Låg induktiv module; Electrical Engineering; Elektro- och systemteknik;

   Sammanfattning : Energy consumption in the world has increased continuously due to a growing population and increased energy consumption per capita. Moreover, the largest part of consumed energy still comes from fossil sources which in 2016 was more than 130 PWh. LÄS MER

3. 7. Design Optimization and Realization of 4H-SiC Bipolar Junction Transistors

   Författare :Hossein Elahipanah; Mikael Östling; Carl-Mikael Zetterling; Anders Hallèn; Adolf Schöner; Tsunenobu Kimoto; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; 4H-SiC; BJT; high-voltage and ultra-high-voltage; high-temperature; self-aligned Ni-silicide Ni-SALICIDE ; lift-off-free; wafer-scale; current gain; Darlington; Electrical Engineering; Elektro- och systemteknik; Informations- och kommunikationsteknik; Information and Communication Technology;

   Sammanfattning : 4H-SiC-based bipolar junction transistors (BJTs) are attractive devices for high-voltage and high-temperature operations due to their high current capability, low specific on-resistance, and process simplicity. To extend the potential of SiC BJTs to power electronic industrial applications, it is essential to realize high-efficient devices with high-current and low-loss by a reliable and wafer-scale fabrication process. LÄS MER

4. 8. Low-Power Delta-Sigma Modulators for Medical Applications

   Författare :Ali Fazli Yeknami; Atila Alvandpour; Martin Anderson; Linköpings universitet; []
   Nyckelord :;

   Sammanfattning : Biomedical electronics has gained significant attention in healthcare. A general biomedical device comprises energy source, analog-to-digital conversion (ADC), digital signal processing, and communication subsystem, each of which must be designed for minimum energy consumption to adhere to the stringent energy constraint. LÄS MER

5. 9. Intentional electromagnetic interference (IEMI) : Susceptibility investigations and classification of civilian systems and equipment

   Författare :Daniel Månsson; Rajeev Thottappillil; Mats Bäckström; William Radasky; Uppsala universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Electromagnetic compatibility; Intentional electromagnetic interference; High power electromagnetic; Other engineering physics; Övrig teknisk fysik;

   Sammanfattning : This PhD thesis addresses the threat posed to society by sources that can produce high power electromagnetic pulses (HEPM) and be used maliciously to disturb or damage electronic equipment. The vulnerability from intentional electromagnetic interference (IEMI) has increased in the recent decades due to the widespread dependence of the civil society on sensitive electronic systems and proliferation of radiation sources. LÄS MER

7. 10. High Speed (MHz) Switch Mode Power Supplies (SMPS) using Coreless PCB Transformer Technology

   Författare :Hari Babu Kotte; kent Bertilsson; Bengt Oelmann; Per Karlsson; Mittuniversitetet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; SMPS; High Frequency converters; Coreless PCB transformers; Electrical engineering; Elektroteknik; Electronics; Elektronik;

   Sammanfattning : The most essential unit required for all the electronic devices is the Power Supply Unit (PSU). The main objective of power supply designers is to reduce the size, cost and weight, and to increase the power density of the converter. LÄS MER