Sökning: "total oxidation"
Visar resultat 16 - 20 av 196 avhandlingar innehållade orden total oxidation.
16. Absorbent Materials from Kraft Pulp
Sammanfattning : SuperAbsorbent Polymers (SAPs) have, since being introduced in the 1980s, become an important constituent in hygiene products, such as disposable diapers. The design of disposable diapers has changed over the years and today thinner products can be produced partly because of the excellent absorption and retention properties of the petrochemical-based SAPs. LÄS MER
17. A study on the Submerged Entry Nozzels (SEN) respecting clogging and decarburization
Sammanfattning : The submerged entry nozzle (SEN) has been used to transport the molten steel from tundish to the mould. The main purpose of the SEN usage is both to prevent oxygen and nitrogen pick-up by molten steel and to achieve the desired flow condition in the mould. LÄS MER
18. Studies of a Heavy-Duty Diesel Aftertreatment System Based on the NOX Storage and Reduction Technology
Sammanfattning : The legislative limits for NOX emissions in the exhaust gas from heavy-duty diesel engines will be decreased in the European Union from today 3.5 g/kWh (Euro IV) to 2.0 g/kWh in 2008 (Euro V). In the USA and Japan a similar trend can be seen. LÄS MER
19. Catalytic Emission Abatement and Gas Separation
Sammanfattning : Air pollution is still today a major health problem. Emissions from mobile and stationary sources are regulated, but economical considerations limit the implementation of the most efficient abatement systems. To improve urban air quality, there is therefore a need to develop simple, durable and cost efficient emission control methods. LÄS MER
20. An Experimental Study of Submerged Entry Nozzles (SEN) Focusing on Decarburization and Clogging
Sammanfattning : The submerged entry nozzle (SEN) is used to transport the molten steel from a tundish to a mould. The main purpose of its usage is to prevent oxygen and nitrogen pick-up by molten steel from the gas. Furthermore, to achieve the desired flow conditions in the mould. LÄS MER