Sökning: "forming simulation"
Visar resultat 11 - 15 av 149 avhandlingar innehållade orden forming simulation.
11. Modeling and Simulation of Physical Systems in a Mechatronic Context
Sammanfattning : This thesis gives different views on the modeling and simulation of physical systems, especially together with embedded systems, forming mechatronic systems. The main considered application domain is automotive. LÄS MER
12. CONCRETE FORM[ing]WORK : Design, Fabrication, Simulation and Correlation of Parametrically Patterned Flexible Formwork and Concrete
Sammanfattning : Concrete is one of the most commonly used construction materials, yet industrial fabrication continues to default to established standards of planar formwork and uniform cross-sections for the sake of simplicity and predictability. The research conducted within Concrete Form[ing]work explored alternative methods of producing concrete formwork with a simple, technical re-imagination of material: exchanging the familiar, i. LÄS MER
13. Prediction of springback in sheet metal forming: with emphasis on material modeling
Sammanfattning : The prediction of springback is probably the area in sheet metal forming simulation, where the least success has been achieved in terms solution accuracy. The springback is caused by the release of the residual stresses in the work piece after the forming stage. LÄS MER
14. A Novel Fiber Interaction Method for Simulation of Early Paper Forming
Sammanfattning : In the forming section of a paper machine, a fiber suspension is flowing down onto a forming fabric, and a paper structure is formed. By using computer simulations this process can be studied, attaining new knowledge helping to improve paper quality and machine efficiency. LÄS MER
15. Experimental and computational investigation of the roll forming process
Sammanfattning : One of the first questions to consider when designing a new roll forming line is the number of forming steps required to produce a profile. The number depends on material properties, the cross-section geometry and tolerance requirements, but the tool designer also wants to minimize the number of forming steps in order to reduce the investment costs for the customer. LÄS MER