Sökning: "debris flow"
Visar resultat 6 - 10 av 29 avhandlingar innehållade orden debris flow.
6. Numerical Investigations on Debris Bed Coolability and Mitigation Measures in Nordic Boiling Water Reactors
Sammanfattning : This thesis is aiming at coolability assessment of particulate debris beds formed in hypothetical severe accidents of Nordic boiling water reactors (BWRs) which may employ either lower drywell flooding or control rod guide tubes (CRGT) cooling as severe accident management strategies. For this purpose, quench and cooling limit (dryout) of debris beds after their formation from fuel coolant interactions were investigated by numerical simulations using the MEWA code. LÄS MER
7. Study on Metallic Melt Coolant Interactions and Debris Bed Formation in a Water Pool
Sammanfattning : To assess corium coolability during severe accidents of LWR, significant number of studies have been conducted previously to investigate the characteristics of debris beds formed from FCI due to fragmentation of molten corium and settlement of the fragments in a water pool. However, their focus has been placed on the oxidic component (UO2/ZrO2) of corium, while little attention has been paid to the debris bed formation due to FCI of the metallic component (Zr/Fe) of corium. LÄS MER
8. Performance of image-based velocimetry in river flow – Large Scale PIV and PTV
Sammanfattning : River flow velocity is critical information for hydraulic and hydrological applications. Monitoring flow fields in near-plant waterways and river reach has wide engineering applications insustainable hydropower generation. LÄS MER
9. Time dependent flow of biolubricant and suspended particles behavior within total hip replacement
Sammanfattning : Total hip replacement (THR) has been one of the most successful surgeries in the 21st century. Ultra-high-molecular-weight-polyethylene (UHMWPE) shows favorable mechanical and tribological properties when used as a bearing surface material in THR. However, produced UHMWPE wear particles challenge increasing the THR lifetimes. LÄS MER
10. Bioprocess Monitoring and Control in Pseudomonas cepacia and recombinant Escherichia coli cultivations
Sammanfattning : The control of cultivation conditions and its influence on growth and production have been investigated. The use of fed-batch processes have been demonstrated for several cultivation systems and so has the use of different control signals in these systems. LÄS MER