Sökning: "bend test"

Visar resultat 16 - 20 av 24 avhandlingar innehållade orden bend test.

  1. 16. Simulation methods for hydropower flows : modeling and validation experiments

    Författare :T. Fredrik Engström; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Strömningslära; Fluid Mechanics;

    Sammanfattning : My research project aims for more accurate modeling of the flow in hydropower plants. By accurate modeling, it is possible to try different modifications on existing plants in an affordable manner. Also, entirely new designs can be tested before realization. Hydropower delivers almost 50% of Sweden's electricity demand with a production of 74 TWh. LÄS MER

  3. 17. A Study of the Initial Mould Filling during Up-hill Ingot Casting

    Författare :Line Hallgren; Pär Jönsson; Anders Tilliander; Seppo Louhenkilpi; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; swirling flow; up-hill teeming; nozzle; casting; fluid flow; modelling; CFD; LDA; swirl; ingot casting; filling; red eye;

    Sammanfattning : The fluid flow in the mould during up-hill teeming is of great importance for the quality of the cast ingot and thereby the quality of the final steel products. At the early stage of the filling of an up-hill teeming mould, liquid steel flows with a high velocity from the runner into the mould. LÄS MER

  4. 18. Three-Dimensional Modelling of Bond in Reinforced Concrete Theoretical Model, Experiments and Applications

    Författare :Karin Lundgren; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; three-dimensional analysis; splitting effects; bond; finite element analysis; reinforced concrete; pull-out tests; non-linear fracture mechanics; frame corners; splicing of reinforcement; cyclic loading;

    Sammanfattning : The bond mechanism between deformed bars and concrete is known to be influenced by multiple parameters, such as the strength of the surrounding structure, the occurrence of splitting cracks in the concrete and the yielding of the reinforcement. However, when reinforced concrete structures are analysed using the finite element method, it is quite common to assume that the bond stress depends solely on the slip. LÄS MER

  5. 19. Silicon micromachined waveguide components for terahertz systems

    Författare :Bernhard Beuerle; Joachim Oberhammer; Umer Shah; Kamal Sarabandi; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; micromachining; waveguide; terahertz; deep reactive ion etching; silicon on insulator; on-wafer characterization; InP; SiGe; Electrical Engineering; Elektro- och systemteknik;

    Sammanfattning : This thesis presents silicon micromachined waveguide components for sub-terahertz and terahertz (THz) systems fabricated by deep reactive ion etching (DRIE). Historically the main driving force for the development of THz systems has been space-based scientific instruments for astrophysics, planetary and Earth science missions. LÄS MER

  7. 20. Concepts for hot sheet metal forming of titanium alloys

    Författare :Eva-Lis Odenberger; Roger Reed; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Hot sheet metal forming; Titanium; FE simulation; Validation; Springback; HCP; Varmforming; Titan; FE simulering; Validering; Återfjädring; HCP; Hållfasthetslära; Solid Mechanics;

    Sammanfattning : To increase the competitiveness of the Swedish aero engine industry alternative manufacturing methods for load carrying aero engine structures are desired, in order to reduce product cost and enable weight reduction and thereby fuel consumption. Traditionally, these structures mainly consist of large-scaled single castings of e.g. LÄS MER