Sökning: "Metall Fatigue"

Hittade 3 avhandlingar innehållade orden Metall Fatigue.

  1. 1. Electron beam melting: Impact of part surface properties on metal fatigue and bone ingrowth

    Författare :Rebecca Klingvall Ek; Lars-Erik Rännar; Mikael Bäckström; Jaan Hong; Ola Harrysson; Mittuniversitetet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Additive Manufacturing AM ; Electron Beam Melting EBM ; As-built surfaces; Bone Ingrowth; Metall Fatigue; Machined Surfaces; Hirtisation; Hot Isostatic Pressing HIP ;

    Sammanfattning : AbstractThe aim of this thesis is to investigate aspects on how additive manufacturing (AM) contributes to functional bone implants with the use of the electron beam melting (EBM) technology. AM manufactures parts according to computer-aided design, and the EBM technology melts powder using an electron beam, which acts similar to a laser beam. LÄS MER

  3. 2. Modelling and simulation of short fatigue cracks

    Författare :Christina Bjerkén; Materialteknik; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; materialteknik; Materiallära; Material technology; Interface cracks; Dislocations; Short cracks; Local plasticity;

    Sammanfattning : The growth of short fatigue cracks deviates from the behaviour of long fatigue cracks even if subjected to the same nominal driving force. The influence from the microstructure is pronounced, while crack closure effects may not be that important as for longer cracks. LÄS MER

  4. 3. Mechanical Properties of Semi-Solid Al Castings : Role of Stirring

    Författare :Qing Zhang; Anders E.W. Jarfors; Stefan Jonsson; Jens Bergström; Jönköping University; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Rheometal™ process; aluminium alloys; stirring; segregation; porosity; oxides; ductility; fatigue performance;

    Sammanfattning : Semi-solid metal (SSM) casting has been widely used in automotive industries to reduce the weight. In RheoMetalTM process which is one of the variations of SSM, the slurry fabrication can be finished within 30 second and can the slurry making process can be integrated into a high pressure die casting (HPDC) route without significant adjustments, making the process a promising alternative for industrial application. LÄS MER