Sökning: "Operation and Maintenance Engineering"

Visar resultat 1 - 5 av 255 avhandlingar innehållade orden Operation and Maintenance Engineering.

  1. 1. Differential railway track settlement in a transition zone – Field measurements and numerical simulations

    Författare :Kourosh Nasrollahi; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; fibre Bragg grating sensors; dynamic vehicle–track interaction; heavy haul traffic; non-linear track model; 3MB slab track; Transition zone; empirical settlement model; condition monitoring;

    Sammanfattning : In a transition zone between two different railway track forms, there is a discontinuity in track structure leading to a gradient in track stiffness. Examples include transitions between different superstructures, e.g., slab track to ballasted track, and/or between different substructures, e. LÄS MER

  3. 2. Maintenance-related incidents and accidents : aspects of hazard identification

    Författare :Mattias Holmgren; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Kvalitetsteknik; Quality Technology and Management; Drift och underhållsteknik; Operation and Maintenance;

    Sammanfattning : The satisfaction of stakeholders depends upon the fulfilment of their requirements. Two important stakeholder requirements related to technical systems are dependability and safety. However, system operation will gradually impair its performance leading to potentially hazardous states of the system. LÄS MER

  4. 3. Load and Risk Based Maintenance Management of Wind Turbines

    Författare :Pramod Bangalore; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; optimization; wind energy.; supervisory control and data acquisition SCADA ; condition monitoring system CMS ; Artificial neural networks ANN ; maintenance strategy; maintenance planning; maintenance management; life cycle cost;

    Sammanfattning : The cost of maintenance is a considerable part of the total life cycle cost in wind turbines, especially for offshore applications. Research has shown that some critical components account for most of the downtime in the wind turbines. LÄS MER

  5. 4. Maintenance related losses : a study at the Swedish National Rail Administration

    Författare :Mattias Holmgren; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Kvalitetsteknik; Quality Technology and Management; Drift och underhållsteknik; Operation and Maintenance;

    Sammanfattning : The global competition among companies has lead to higher demands of the production system. Quality has become an important factor for competition. Customer satisfaction depends upon the fulfillment of a number of quality parameters. Two important quality parameters are dependability and safety. LÄS MER

  7. 5. Washing Machine Design Optimization Based on Dynamics Modeling

    Författare :Thomas Nygårds; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Experiments; Multiobjective Optimization; Modeling; Vibration dynamics; Washing machine; Suspensions; Semi-active control.; Automatic balancing;

    Sammanfattning : The spinning process in a washing machine is a source of undesired vibrations and noise and may cause discomfort both to the user as well as for the machine itself due to vibrations which have impact on system lifetime, reliability of operation and capacity.The aim of this thesis is to develop mathematical and computational models of a washing machine of modern type and use these models for dynamics analysis and in optimization routines to make improvements of the machine mechanical design. LÄS MER