Sökning: "pellet heating"

Visar resultat 11 - 15 av 33 avhandlingar innehållade orden pellet heating.

1. 11. Pellet reduction properties under different blast furnace operating conditions

   Författare :Ulrika Leimalm; Luleå tekniska universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Process Metallurgy; Processmetallurgi;

   Sammanfattning : One of the aims of modern blast furnace (BF) ironmaking is to reduce coke consumption. One way is to increase the injection of reduction agents, such as pulverized coal. An increase in pulverized coal injection rate (PCR) will affect the blast furnace process and the conditions for iron oxide reduction. LÄS MER

3. 12. Improving Wood Fuel Pellets for Household Use : Perspectives on Quality, Efficiency and Environment

   Författare :Magnus Ståhl; Bengt Månsson; Johan Vinterbäck; Karlstads universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; wood fuel pellets; sawdust; drying; pellet production; recirculation; quality; efficency; environment; Miljö- och energisystem; Environmental and Energy Systems;

   Sammanfattning : Bioenergy is one of many contributors to reducing the use of fossil fuels in order to mitigate climate change by decreasing CO2-emissions, and the potential for biofuels are large. The wood fuel pellets are a refined biofuel made of sawdust, which is dried and compressed to achieve improved fuel and transportation properties. LÄS MER

4. 13. Wood Fuel Pellets: Sawdust Drying in the Energy System

   Författare :Magnus Ståhl; Karlstads universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; wood fuel pellets; sawdust; drying; pellet production; recirculation; VOC; system integration; Miljö- och energisystem; Environmental and Energy Systems;

   Sammanfattning : In 2004, the amount of wood fuel pellets used in Sweden was 1 256 000 tons, it was mostly used in large scale burning for district heating. Over the last 10 years, a significant increase in pellet production has occurred and today the preferred raw materials for pellet production, i.e., dry sawdust and wood shavings, are insufficient. LÄS MER

5. 14. Mitigating Off-Gassing and Self-Heating in Fuel Wood Pellets Storage : A Raw Materials Selection and Pre-Treatment Centred Approach

   Författare :Workson Siwale; Jonas Berghel; Gunnar Henriksson; Michael Finell; Stefan Frodeson; Mani Sudhagar; Karlstads universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; solid biofuels; densified biomass; heat generation; off-gas emissions; carbon monoxide; carbon dioxide; methane; fatty and resin acids; Miljö- och energisystem; Environmental and Energy Systems;

   Sammanfattning : Wood pellets have become a preferred solid biomass fuel for heat and power generation due to their standardized nature, known properties, and consistent quality. However, pellets produced from fresh sawdust sometimes undergo self-heating and off-gassing during storage. This poses a challenge for their transportation and storage. LÄS MER

7. 15. Drying of iron ore pellets : analysis with CFD

   Författare :Anna-Lena Ljung; Luleå tekniska universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Strömningslära; Fluid Mechanics;

   Sammanfattning : Iron ore pellets are a highly refined product and for companies such as LKAB it is important to constantly improve the pelletization in order to enhance production and improve product quality. A long term goal has been established to develop and considerably refine tools and techniques with which the drying zone of a pelletizing plant can be optimized. LÄS MER