Sökning: "initial oxidation"

Visar resultat 1 - 5 av 143 avhandlingar innehållade orden initial oxidation.

  1. 1. Oxidation kinetics of nickel particles

    Författare :Richard Karmhag; Uppsala universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Materials science; Oxidation; kinetics; nickel; particles; UFP; solar absorber; Materialvetenskap; Materials science; Teknisk materialvetenskap; Solid State Physics; fasta tillståndets fysik;

    Sammanfattning : Nanoparticles have an immense surface to volume ratio. This is a key factor to the new properties of some materials made up of such particles. The oxide layer formed on all materials will have a large influence on the behaviour of these materials. The layer isadvantageous in some cases but causes problems in other. LÄS MER

  3. 2. Initial Oxidation Kinetics of Al(111): A Monte Carlo Study

    Författare :Dogan Ergun Oner; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; oxide nucleation and growth; dissociative adsorption; metal oxidation; Monte Carlo simulations; Al 111 ; kinetics; aluminium; surface oxidation;

    Sammanfattning : Almost all metals around us have a thin oxide layer on top of the bulk metal underneath. Often this oxide film protects the metal against further oxidation, or corrosion. Examples are the oxide film that makes stainless steel "stain-less" or the ones on titanium and aluminium alloys, which are very corrosion resistant. LÄS MER

  4. 3. Performance of High-temperature Coatings : Oxidation and Interdiffusion

    Författare :Xiaoyu Sun; Ru Lin Peng; Johan Moverare; Xin-Hai Li; Lindwall Greta; Linköpings universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; coating; diffusion; phase transformation; oxidation;

    Sammanfattning : The use of aluminiferous coatings profoundly improves the service life of superalloys but leads to the microstructural degradation of superalloys and thus the loss of mechanical properties. To solve this trade-off, two strategies were employed in this research. LÄS MER

  5. 4. Investigations on the Oxidation of Iron-chromium and Iron-vanadium Molten Alloys

    Författare :Haijuan Wang; Seshadri Seetharaman; Ashok Lahiri; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Oxidation; High-alloy steelmaking; Retention; CO2-O2; Fe-Cr melt; Fe-Cr-C melt; Fe-V melt; Vanadium containing slags; Kinetics; Thermodynamics properties.; Metallurgical process engineering; Metallurgisk processteknik; Materials science; Teknisk materialvetenskap;

    Sammanfattning : With the progress of high alloy steelmaking processes, it is essential to minimize the loss of valuable metals, like chromium and vanadium during the decarburization process, from both economic as well as environmental view points. One unique technique to realize this aim, used in the present work, is the decarburization of high alloy steel grades using oxygen with CO2 in order to reduce the partial pressure of oxygen. LÄS MER

  7. 5. Initial Oxidation of β-NiAl(Pt) Coatings and Model Alloys

    Författare :Henrik Svensson; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; FIB-SEM; SEM; #946; TEM; Diffusion Coatings; Metal-Oxide Interface; High Temperature Oxidation; Cavities; Platinum; -NiAl;

    Sammanfattning : The aim of this work was to investigate the oxidation properties of NiAl coatings and model materials during high temperature oxidation. One of the important issues was to elucidate the beneficial role of Pt additions. A better understanding of the involved processes provides a key for the further improvement of the coatings performance. LÄS MER