Sökning: "cohesive modelling"

Visar resultat 1 - 5 av 34 avhandlingar innehållade orden cohesive modelling.

1. 1. On Cohesive Modelling of Carbon/Epoxy Composites : Delamination and Fibre Compressive Failure

   Författare :Daniel Svensson; Ulf Stigh; Bent Sørensen; Högskolan i Skövde; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; CFRP; Cohesive zone model; J-integral; LEFM; Delamination; Compressive failure; Technology; Teknik; Mechanics of Materials; Materialmekanik;

   Sammanfattning : Carbon Fibre Reinforced Polymers are widely used in engineering applications where weight saving and high mechanical performance are a key factors. However, an inheren tweakness of laminated CFRP:s is there relatively low resistance to delamination. Therst part of this thesis is devoted to extract cohesive laws associated with delamination. LÄS MER

3. 2. Mechanical behaviour of adhesive layers : experimental methods, cohesive laws, and fracture mechanics

   Författare :Anders Biel; Kristofer Gamstedt; Högskolan i Skövde; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; experimental method; adhesive layer; cohesive law; fracture; fracture energy; energy release rate; peel; shear; Materials science; Teknisk materialvetenskap; Teknik; Technology;

   Sammanfattning : Adhesive joining is today viewed as one of the key technologies to achieve decreased emissions in the automobile industry. To decrease weight, optimal material selection often results in different materials for different parts. This leads to the necessity to join mixed material. Here, the use of adhesives is the most promising joining technology. LÄS MER

4. 3. Modelling of Delamination Growth in Composite Structures

   Författare :Niklas E. Jansson; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; large deformation; interface; composite materials; 3D-shell; cohesive zone; regularization; shell element; delamination;

   Sammanfattning : Delaminations constitute an important damage and failure mode in polymeric composite laminates. In order to explicitly incorporate and model the delamination progression within a finite element analysis, the meso-modelling concept is applied in the present work. The laminate is thereby represented by separate layers connected with interfaces. LÄS MER

5. 4. Cohesive modelling of the temperature dependence of epoxy based adhesives in Mode I and Mode II loading

   Författare :Tomas Walander; Ulf Stigh; Anders Biel; Erik Serrano; Högskolan i Skövde; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Cohesive laws; Epoxy adhesive; Fracture energy; Peak stress; Temperature; Regression analyses; Shear modulus; Young’s modulus.; Technology; Teknik;

   Sammanfattning : In this work, the influence of the temperature on the cohesive laws for two epoxy adhesives is studied at temperatures below the glass transition temperature for both Mode I and Mode II loading. Cohesive laws are measured experimentally under quasi-static loading conditions in the temperature range -30≤T≤80"C" . LÄS MER

7. 5. Modelling of intergranular stress corrosion cracking mechanism : Du som saknar dator/datorvana kan kontakta [email protected] för information

   Författare :Michal Sedlak Mosesson; Bo Alfredsson; Thierry Couvant; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Cohesive Zone Model; Fracture Mechanics; Diffusion; Duplex oxide; Multi-physics; Finite Element Model; Engineering Mechanics; Teknisk mekanik;

   Sammanfattning : When assessing nuclear power plant life, stress corrosion cracking (SCC) plays an important role. Stress corrosion cracking in nuclear power plants is well recognized and heavily researched. Still due to its complicated nature it is not completely understood. There are many different damage mechanisms behind SCC. LÄS MER