Sökning: "Magali Boutonnet"

Visar resultat 1 - 5 av 13 avhandlingar innehållade orden Magali Boutonnet.

  1. 1. Catalytic conversion of syngas to higher alcohols over MoS2-based catalysts

    Författare :Robert Andersson; Magali Boutonnet; Sven Järås; Anders Holmen; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; conversion; higher alcohols; mixed alcohols; MoS2; syngas; Chemical Engineering; Kemiteknik;

    Sammanfattning : The present thesis concerns catalytic conversion of syngas (H2+ CO) into a blend of methanol and higher alcohols, an attractive way of producing fuels and chemicals. This route has the potential to reduce the oil dependence in the transport sector and, with the use of biomass for the syngas generation, produce CO2-neutral fuels. LÄS MER

  3. 2. Deactivation of cobalt and nickel catalysts in Fischer-Tropsch synthesis and methanation

    Författare :Javier Barrientos; Magali Boutonnet; Claude Mirodatos; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; cobalt; nickel; Fischer-Tropsch synthesis; methanation; deactivation; carbonyl; sintering; carbon fomation. sulfur; poisoning; Chemical Engineering; Kemiteknik;

    Sammanfattning :             A potential route for converting different carbon sources (coal, natural gas and biomass) into synthetic fuels is the transformation of these raw materials into synthesis gas (CO and H2), followed by a catalytic step which converts this gas into the desired fuels. The present thesis has focused on two catalytic steps: Fischer-Tropsch synthesis (FTS) and methanation. LÄS MER

  4. 3. Development and Assessment of Regeneration Methods for Commercial Automotive Three-Way Catalysts

    Författare :Henrik Birgersson; Magali Boutonnet; Jim A. Andersson; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; automotive catalyst; TWC; aging; sintering; Pd Rh; Pt Rh; regeneration; oxy-chlorination; dispersion; acid-leaching; mathematical modeling; reaction kinetics; Chemical engineering; Kemiteknik;

    Sammanfattning : Car exhaust catalysts were introduced in the early 1980’s, to limit the release of pollutants such as hydrocarbons, carbon monoxide and nitrogen oxides. These catalysts contain noble metals such as palladium (Pd), platinum (Pt) and rhodium (Rh) and are able to simultaneously abate all three of the above-mentioned pollutants, hence the name three-way catalyst (TWC). LÄS MER

  5. 4. Nanomaterials for high-temperature catalytic combustion

    Författare :Erik Elm Svensson; Sven Järås; Magali Boutonnet; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; catalytic combustion; microemulsion; hexaaluminate; magnesia; perovskite; ceria; methane; gas turbine; katalytisk förbränning; mikroemulsion; hexaaluminat; magnesia; perovskit; ceriumdioxid; metan; gasturbin; Catalysis; Katalys;

    Sammanfattning : Katalytisk förbränning är en lovande teknik för användning vid kraftgenerering, särskilt för gasturbiner. Genom att använda katalytisk förbränning kan man nå mycket låga emissioner av kväveoxider (NOX), kolmonoxid (CO) och oförbrända kolväten (UHC) samtidigt, vilket är svårt vid konventionell förbränning. LÄS MER

  7. 5. Nanotemplated High-Temperature Materials for Catalytic Combustion

    Författare :Erik Elm Svensson; Sven Järås; Magali Boutonnet; James J. Spivey; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Carbon templating; Catalytic combustion; Ceria; Gas turbine; Hexaaluminate; Magnesia; Methane; Microemulsion; Perovskite; Chemical engineering; Kemiteknik;

    Sammanfattning : Catalytic combustion is a promising technology for heat and power applications, especially gas turbines. By using catalytic combustion ultra low emissions of nitrogen oxides (NOX), carbon monoxide (CO) and unburned hydrocarbons (UHC) can be reached simultaneously, which is very difficult with conventional combustion technologies. LÄS MER