Sökning: "chemi-thermomechanical pulp"

Hittade 5 avhandlingar innehållade orden chemi-thermomechanical pulp.

1. 1. Mechanical Pulp-Based Nanocellulose : Processing and applications relating to paper and paperboard, composite films, and foams

   Författare :Sinke Henshaw Osong; Per Engstrand; Sven Norgren; Mark Martinez; Mittuniversitetet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; mechanical pulp; thermo-mechanical pulp; chemi-thermomechanical pulp; fractionation; fines; homogenisation; nanocellulose; nano-ligno-cellulose; microfibrillated cellulose; nanofibrillated cellulose; paper; strength properties; crill; TEMPO; nanographite NG ; composite films;

   Sammanfattning : This thesis deals with processing of nanocellulose originating from pulps, with focus on mechanical pulp fibres and fines fractions. The nanocellulose materials produced within this research project were tested for different purposes ranging from strength additives in paper and paperboard products, via composite films to foam materials. LÄS MER

3. 2. Mechanical Pulp Based Nano-ligno-cellulose : Production, Characterisation and their Effect on Paper Properties

   Författare :Sinke Henshaw Osong; Per Engstrand; Sven Norgren; Kristin Syverud; Mittuniversitetet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; mechanical pulp; thermo-mechanical pulp; chemi-thermomechanical pulp; fractionation; fines; homogenisation; nanocellulose; nano-ligno-cellulose NLC ; handsheets; strength properties; crill;

   Sammanfattning : Almost all research on biorefinery concepts are based on chemical pulping processes and ways of utilising lignin, hemicelluloses and extractives as well as a part of the remaining cellulose for production of nano materials in order to create more valuable products than today. Within the Forest as a Resource (FORE) research program at FSCN we are utilising the whole chain of unit processes from forestry to final products as paper and board, where the pulping process research focus on high yield process as TMP and CTMP. LÄS MER

4. 3. Production and application of fine fractions made of chemical pulp for enhanced paperboard strength

   Författare :Elisabeth Björk; Per Engstrand; Mark Martinez; Mittuniversitetet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY;

   Sammanfattning : For all kinds of paperboard packages, the bending stiffness of the paperboard is a crucial property. In multi-ply folding boxboard (FBB) grades, this is obtained by placing different stocks in the outer and centre plies of the board. In the outer plies, a stock with a high tensile stiffness is used, typically made from refined kraft pulp fibres. LÄS MER

5. 4. Materials Design for Paper Electrodes : A Papermaking Perspective on Electrode Fabrication

   Författare :Patrik Isacsson; Isak Engquist; Magnus Berggren; Nadège Reverdy-Bruas; Linköpings universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; Papermaking; Electrodes; Lignin; Nanocarbons; PEDOT:PSS;

   Sammanfattning : The electrification and digitalization of our society has propelled the demand for energy storage solutions. High-end technologies have been developed to satisfy the requirements of demanding applications, such as electromobility and portable consumer electronics, which also increasingly find markets for less demanding applications. LÄS MER

7. 5. Eco-friendly and Catalytic Surface Engineering of Cellulose and Nanocellulose

   Författare :Rana Alimohammadzadeh; Armando Cordova; Dan Bylund; Monica Ek; Mittuniversitetet; []
   Nyckelord :;

   Sammanfattning : The non-stop use of petroleum-based materials such as plastics can generate significant environmental problems, including pollution of the oceans and increased CO2 levels, and cause diseases like cancer due to the starting monomers. Consequently, increased use of sustainable and non-toxic polymers and monomers is required to address these issues. LÄS MER