Sökning: "Metallurgical process science"
Visar resultat 11 - 15 av 35 avhandlingar innehållade orden Metallurgical process science.
11. Assessment of Raw Materials in Stainless Steelmaking-Their Energy Consumption and Greenhouse Gas Emission
Sammanfattning : In stainless steelmaking, around 68% of the total greenhouse gas emissions come from the processing of raw materials. Thus, it is important for steelmakers to make efforts together with their raw material suppliers to implement low-carbon initiatives. To facilitate such initiatives, assessment of raw materials will provide guidance. LÄS MER
12. Thermodynamics and Kinetics in Metallurgical Processes - with a Special Focus on Bubble Dynamics
Sammanfattning : Gas stirring is commonly used in the steelmaking processes to reinforce chemical reactions, kinetic transfer, and inclusion removal, etc. This dissertation concentrates on multiphase flows with gas bubbling to study fluid dynamics and thermodynamics in metallurgical processes. LÄS MER
13. Thermal Stability and Mechanical Properties of Bainitic Steel
Sammanfattning : For material design it is important to understand and establish the relations between the processing of the steel, the resulting microstructure and how that correlate to the properties of the steel. The main focus of this thesis has been to increase this knowledge for low alloy bainitic steels with medium to high carbon content. LÄS MER
14. A study of micro-particles in the dust and melt at different stages of iron and steelmaking
Sammanfattning : The dust particles generated due to mechanical wear of iron ore pellets and clusters formed in molten stainless steel alloyed with rare earth metals (REM) are considered in this study. Firstly, the influence of the characteristics of iron ore pellets, applied load on a pellet bed and partial reduction of the pellets on the size distribution of the generated dust was investigated. LÄS MER
15. On the surface quality of continuously cast steels and phosphor bronzes
Sammanfattning : This thesis work concerns about the importance of the cast surfaces, surface phenomenon such as the formation of the oscillation marks and exudation and related defects including cracks and segregation that happened during the continuous casting. All of the investigated materials were collected during the plant trials while an in-depth analysis on these materials was performed at the laboratory scale with certain explanations supported by the schematic and theoretical models. LÄS MER