Sökning: "Joints"

Visar resultat 16 - 20 av 577 avhandlingar innehållade ordet Joints.

  1. 16. Condition monitoring of process equipment made from plastic materials

    Författare :Bjarne Moursund; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; GRE; glass fibre reinforced epoxy; piping; adhesive; acoustic emission; joints; fatigue life; ultrasonic inspection; water hammer;

    Sammanfattning : .... LÄS MER

  3. 17. Mechanical and Hydromechanical Behaviour of Hard Rock Joints. A laboratory study

    Författare :Roger Olsson; Chalmers tekniska högskola; []
    Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; laboratory shear tests; constant normal stiffness; rock mechanics; hydromechanical behaivour; rock joints; replicas;

    Sammanfattning : As a consequence of rock engineering works, the rock mass will deform due to stress changes. Most deformation occurs in the rock joints, in form of normal and shear strains. These deformations will also change the void geometry and thereby the joint aperture and fluid flow. LÄS MER

  4. 18. Torque and Angle Controlled Tightening of Bolted Joints

    Författare :Göran Toth; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; torque controlled tightening; deformation parameters; momentary elongation; deformation factor; torque; Bolted screwed joints; spring characteristic; Torx; torque and angle controlled tightening; hexalobular; final torque; snug torque; Taylor’s series expansions; preload; plastic deformation; permanent elongation; yield; friction diameter; plastic spring constant; clevis; turn-of-nut method; bearing surface pressure; twisting; Monte-Carlo simulations;

    Sammanfattning : Reduced weight and fuel consumption, improved reliability and engine performance are the main requirements in the automotive industry of today. These requirements demand robust and optimized bolted joints, where a high amount of preload obtained by effective utilisation of the bolt is essential. LÄS MER

  5. 19. Finger-Joints for Laminated Beams : Experimental and Numerical Studies of Mechanical Behaviour

    Författare :Erik Serrano; Byggnadsmekanik; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; LANTBRUKSVETENSKAPER; AGRICULTURAL SCIENCES; Finger-joints; Laminated timber; Testing; Nonlinear fracture mechanics; Finite Elemente Method; Lamininating effect;

    Sammanfattning : The introduction of laminated timber, glulam being an example, allowed many of the disadvantages associated with solid wood to be overcome. The disadvantages in question are mainly those related to the size and shape limits of structural elements made of solid wood and to the large variability in such material properties of solid wood as strength and stiffness. LÄS MER

  7. 20. Application of cohesive modeling in joining technology : Thick adhesive layers and rivet joints

    Författare :Saeed Salimi; Högskolan i Skövde; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Teknik; Technology;

    Sammanfattning : This thesis summarizes the development of cohesive modeling of joints. It presents some new developments regarding the effects of non-zero thickness of adhesive layers and a novel approach of using the concept of cohesive modeling to characterize the failure behavior of rivet joints. LÄS MER