Sökning: "FeCrAl alloy"

Visar resultat 1 - 5 av 20 avhandlingar innehållade orden FeCrAl alloy.

  1. 1. High Temperature Corrosion Behaviour of Ni-base Alloys and FeCrAl Alloys – The Influence of Water Vapour

    Författare :Tommy Sand; Chalmers tekniska högskola; []
    Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Cr-evaporation; FeCrAl alloy; Oxidation; Chromia scale; Alumina scale; High-temperature corrosion; Ni-base alloy;

    Sammanfattning : Electricity production, transportation, and manufacturing industry are some of the largest sources of greenhouse gas emissions. In many cases, these processes are carried out at high temperature and energy efficiency is limited by material degradation, so-called ‘high-temperature corrosion’. LÄS MER

  3. 2. High Temperature Oxidation and Chlorination of FeCrAl alloys

    Författare :Niklas Israelsson; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; KCl; pre-oxidation; FeCrAl; H2O; high-temperature corrosion; kinetics;

    Sammanfattning : AbstractThe constant strive for improved efficiency and lower-cost industrial processes often results in progressively higher temperatures and more aggressive environments. High- temperature corrosion is a well-known problem in biomass- and waste-fired boilers and is one of the obstacles to overcome in achieving a more sustainable society. LÄS MER

  4. 3. Is water a crucial factor in the oxidation of FeCrAl alloys?

    Författare :Helena Josefsson; Chalmers tekniska högskola; []
    Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; alpha-Al203; oxidation kinetics; high temperatur corrosion; reactive elements; FeCrAl; vater vapour; transient alumina;

    Sammanfattning : FeCrAl alloys are much used at high temperatures because the formation of a dense and slow-growing alumina scale provides resistance towards oxidation and high temperature corrosion. While the FeCrAl alloys are primarily intended for temperatures above 950ºC, they are sometimes used at lower temperature, for example as supports in automotive catalysts. LÄS MER

  5. 4. High Temperature Corrosion of FeCrAl Alloys: The influence of water vapour and alkali salt

    Författare :Niklas Israelsson; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; pre-oxidation; FeCrAl; kinetics; high temperature corrosion; KCl; water vapour; alumina; oxidation;

    Sammanfattning : The corrosive environment in biomass- and waste-fired boilers has been known for several years. The traditionally used FeCr and FeNiCr steels show limited performance in the aggressive environment that contains more H2O and alkali salts than traditional fuel. LÄS MER

  7. 5. Mechanisms of Metal Dusting

    Författare :Peter Szakálos; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; metal dusting; mechanism; driving force; kinetics; high temperature corrosion; carburization; stainlesssteel; Ni-base alloys; iron; alumina formers; FeCrAl; oxidation; carbon nanotubes; discontinuous precipitation; Materials science; Teknisk materialvetenskap;

    Sammanfattning : The primary intention with this Doctoral thesis is to fillin the knowledge gaps and raise the level of understandingregarding the different metal dusting mechanisms in general andexplain the process in detail for high alloyed materials.Considerable effort is put into identifying the driving forcesand elucidating the diffusional processes in metal dusting. LÄS MER