Sökning: "amorphous materials"
Visar resultat 21 - 25 av 238 avhandlingar innehållade orden amorphous materials.
21. Materials Science of Multilayer X-ray Mirrors
Sammanfattning : This thesis treats the reflective and structural properties of multilayer structures. Soft X-ray multilayer mirrors intended as near-normal incidence reflective optics and polarizers in the water window (λ=2.4-4.4 nm) are the main focus. LÄS MER
22. Characterization, Activation and Reactivity of Natural Pozzolans for Use as Supplementary Cementitious Materials
Sammanfattning : Supplementary cementitious materials (SCMs) represent one of the most practicable ways to reduce the negative environmental impact of cement. Natural pozzolans like clays and volcanic materials (VMs) offer promising alternatives to industrial by-products such as blast furnace slags and fly ashes, whose availability cannot meet the growing demand for SCMs globally. LÄS MER
23. Minuscular sculpturing
Sammanfattning : Most of the processes employed in microstructure technology have been adopted from the fabrication scheme of integrated circuits (IC). Although being extremely reliable and cost efficient, they suffer from poor material and geometrical flexibility. LÄS MER
24. Synthesis and Evaluation of TaC:C Low-Friction Coatings
Sammanfattning : In the large family of carbon-based coatings there are members capable of providing a rare and very desirable combination of high wear resistance and low friction. The field of application for this kind of coatings is steadily increasing which, naturally, give raise to new questions and demands. LÄS MER
25. The Effects of Morphology and Surface Oxidation of Stainless Steel Powder in Laser Based-Powder Bed Fusion
Sammanfattning : Laser based-powder bed fusion (LB-PBF) is one of the many techniques within additive manufacturing (AM) that allows for near net shape manufacturing of metallic components. By using powder feedstock, it is possible to spread thin layers of powder and further selectively fuse powder in a repetitive manner until the component is completed. LÄS MER