Sökning: "Grouting"
Visar resultat 6 - 10 av 42 avhandlingar innehållade ordet Grouting.
6. Rock grouting design: Rheological aspects and radial flow visualizations with ultrasound
Sammanfattning : The rheological properties of cement-based grouts play a crucial role indetermining the final spread in grouted rock formations. In rheological terms,cement grouts are known to be complex time-dependent yield stress fluids,but their steady flow behavior is often described by the simple Binghamconstitutive law. LÄS MER
7. Study of Pumping Pressure and Stop Criteria in Grouting of Rock Fractures
Sammanfattning : Today practice of grouting is based on empirical approaches in that, pumping pressure and stop criteria are determined by benchmarking similar projects. Considering a maximum limit for grouting pressure would allow applying a relatively high pressure that may lead to jacking of the fracture or even uplift of the rock mass. LÄS MER
8. Drip Sealing Grouting of Tunnels in Crystalline Rock: Conceptualisation and Technical Strategies
Sammanfattning : A conceptual model of the groundwater hydraulic conditions around the tunnel contour in ancient brittle crystalline rocks has been developed and verified. The general aim has been to reach an understanding of the groundwater conditions in and close to the tunnel roof where dripping takes place and to propose technical and practical strategies for waterproofing. LÄS MER
9. Grouting of Hard Rock with Gelling Liquids, Field and Laboratory Studies of Silica sol
Sammanfattning : Recent grouting projects in Sweden have concentrated on the grout itself. The only grout normally used in Sweden is a cement-based one. During the past 10 years, the acceptable flow of water into tunnels has been significantly reduced. The current requirements mean that an average fracture aperture of around 0. LÄS MER
10. Tunnel Grouting: Engineering Methods for Characterization of Fracture Systems in Hard Rock and Implications for Tunnel Inflow
Sammanfattning : In tunnel construction in hard rock, a common method to reduce water inflow is to perform pre-grouting. The grouting design should be adapted to the current rock mass conditions as well as the stated inflow requirement for the tunnel project. LÄS MER