Sökning: "ytbehandling"
Visar resultat 11 - 15 av 18 avhandlingar innehållade ordet ytbehandling.
11. Development of new characterization techniques for III-V nanowire devices
Sammanfattning : This dissertation presents the new methods and techniques developed to investigate the properties of nanowires (NWs) and NW devices and the results obtained using these methods. The growth and characterization of NWs have become a large research field because NWs have been shown to improve the properties of many semiconductor applications such as transistors, solar cells, and light emitting diodes. LÄS MER
12. Improving Productivity and Enzyme Stability Through Process Design: Lipase-catalysed Synthesis of Epoxides and Esters
Sammanfattning : Interest in sustainable development has increased throughout society during the past decades, and the chemical industry is no exception. The appeal for renewable raw materials has consequently increased and has paved the way for the implementation of industrial biotechnology. LÄS MER
13. Investigations of Flow Patterns in Ventilated Rooms Using Particle Image Velocimetry : Applications in a Scaled Room with Rapidly Varying Inflow and over a Wall-Mounted Radiator
Sammanfattning : This thesis introduces and describes a new experimental setup for examining the effects of pulsating inflow to a ventilated enclosure. The study aimed to test the hypothesis that a pulsating inflow has potential to improve ventilation quality by reducing the stagnation zones through enhanced mixing. LÄS MER
14. Polyethylene – metal oxide particle nanocomposites for future HVDC cable insulation : From interface tailoring to designed performance
Sammanfattning : Low-density polyethylene (LDPE) nanocomposites containing metal oxide nanoparticles are considered as promising candidates for insulating materials in future high-voltage direct-current (HVDC) cables. The significant improvement in dielectric properties compared with unfilled polymer is attributed to the large and active interface between the nanoparticles and the polymer. LÄS MER
15. Friction Stir Welding of Copper Canisters Using Power and Temperature Control
Sammanfattning : This thesis presents the development to reliably seal 50 mm thick copper canisters containing the Swedish nuclear waste using friction stir welding. To avoid defects and welding tool fractures, it is important to control the tool temperature within a process window of approximately 790 to 910°C. LÄS MER