Sökning: "yogeshwar"
Hittade 5 avhandlingar innehållade ordet yogeshwar.
1. Droplet size, concentration, and temperature mapping in sprays using SLIPI-based techniques
Sammanfattning : Structured laser illumination planar imaging (SLIPI) is a technique capable of suppressing multiple light scattering effects in optically dense sprays, resulting in spray images without blurs and with enhanced contrast. The novelty of the work presented in this thesis concerns the applications of a variety of SLIPI-based techniques for the measurement of droplet size, droplet concentration, and liquid temperature in atomizing sprays. LÄS MER
2. A Study of the Swirling Flow Pattern when Using TurboSwirl in the Casting Process
Sammanfattning : The use of a swirling flow can provide a more uniform velocity distribution and a calmer filling condition according to previous studies of both ingot and continuous casting processes of steel. However, the existing swirling flow generation methods developed in last decades all have some limitations. LÄS MER
3. Thermodynamics and Kinetics in Metallurgical Processes - with a Special Focus on Bubble Dynamics
Sammanfattning : Gas stirring is commonly used in the steelmaking processes to reinforce chemical reactions, kinetic transfer, and inclusion removal, etc. This dissertation concentrates on multiphase flows with gas bubbling to study fluid dynamics and thermodynamics in metallurgical processes. LÄS MER
4. A Study of Bubble and Inclusion Behaviors in a Liquid Steel Bath
Sammanfattning : The bubble formation processes in a water model experiment were measured by a high-speed camera. Nozzle diameters of 0.5 mm, 1 mm and 2 mm were investigated under both wetting and non-wetting conditions. LÄS MER
5. A study of mold flux entrapment and gas entrainment in an ingot casting process
Sammanfattning : The focus of this work is to study the gas entrainment and mold flux entrapments during the ingot filling process based on physical and numerical modelling.The formation of the free surface was investigated in the uphill teeming method, which illustrates a dynamic change at a quasi-steady state. LÄS MER