Sökning: "wire feeding"
Visar resultat 1 - 5 av 6 avhandlingar innehållade orden wire feeding.
1. Inclusion Motion under a Swirl Flow in the Continuous Casting Process and Wire Feeding in the Induction Furnace
Sammanfattning : The thesis includes the studies of two phenomena related to continuous casting. One subject is the inclusion motion in the submerged entry nozzle (SEN) and mold when using a swirl flow. The swirl flow is generated in a SEN by using an electromagnetic swirl flow generator (EMSFG). LÄS MER
2. EM Design for New Ultra Wide Band Technologies: Eleven Feed Baluns, Bowtie Antennas and Gap Waveguides
Sammanfattning : UWB (ultra wideband), depending on the application requirement, is usually referred to more than 500 MHz bandwidth for radio/wireless applications. Here in this thesis it is also used to denote extremely wideband antennas and components of several octaves bandwidth, particularly for high frequency applications. LÄS MER
3. Baluns, Hybrids and Power Dividers for Ultra- Wideband Antennas
Sammanfattning : UWB (ultra wideband), depending on the application requirement, is usually referred to 2:1 bandwidth for radio/wireless applications. Here in this thesis it is also used to denote extremely wideband antenna and components at several octave bandwidth, particularly for high frequency applications, such as the 1 – 10 GHz antenna system needed for the Square Kilometer Array (SKA) radio telescope and the 2 – 14 GHz antenna system for the VLBI2010 (Very Long Base line Interferometer) project. LÄS MER
4. Electromagnetic Interference in Modern Electrified Railway Systems with Emphasis on Pantograph Arcing
Sammanfattning : Electrified railways are undergoing rapid modernized in terms of increased speed, freight capacity and increased traffic. Traction systems are spread across countries with different signaling and power feeding systems. Signalling systems are undergoing modernization and now-a-days are more dependent on wireless and radio based services. LÄS MER
5. Phenomena in laser based material deposition
Sammanfattning : This thesis is regarding the use of a laser beam to deposit material. Phenomena in two processes, laser beam welding with filler wire and blown powder directed energy deposition (DED) also known as laser metal deposition (LMD)1, are discussed. LÄS MER