Sökning: "wheel-rail forces"

Visar resultat 1 - 5 av 22 avhandlingar innehållade orden wheel-rail forces.

  1. 1. On Efficient Modelling of Wheel-Rail Contact in Vehicle Dynamics Simulation

    Författare :Matin Shahzamanian Sichani; Mats Berg; Roger Enblom; Asier Alonso; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; wheel-rail contact; non-elliptic contact; rail vehicle dynamics; rolling contact; vehicle-track interaction; wheel-rail damage; Järnvägsgruppen - Fordonsteknik; Järnvägsgruppen - Fordonsteknik; Järnvägsgruppen - Tribologi; The KTH Railway Group - Tribology; Vehicle and Maritime Engineering; Farkostteknik;

    Sammanfattning : The wheel-rail contact is at the core of all research related to vehicletrackinteraction. This tiny interface governs the dynamic performanceof rail vehicles through the forces it transmits and, like any high stressconcentration zone, it is subjected to serious damage phenomena. LÄS MER

  2. 2. Wheel-rail contact modelling in vehicle dynamics simulation

    Författare :Matin Shahzamanian Sichani; Mats Berg; Roger Enblom; Elena Kabo; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; wheel-rail contact; non-elliptic contact; vehicle-track interaction; rail vehicle dynamics; rolling contact; MBS; virtual penetration; Järnvägsgruppen - Fordonsteknik; Järnvägsgruppen - Fordonsteknik; Järnvägsgruppen - Tribologi; The KTH Railway Group - Tribology;

    Sammanfattning : The wheel-rail contact is at the core of all research related to vehicle-track interaction. This tiny interface governs the dynamic performance of rail vehicles through the loads it transmits and, like any high stress concentration zone, it is subjected to serious damage phenomena. LÄS MER

  3. 3. Time-domain modelling of high-frequency wheel/rail interaction

    Författare :Astrid Pieringer; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; wheel rail interaction; railway noise; roughness; time domain; frictional instability; discrete irregularities; transient contact; non-Hertzian contact;

    Sammanfattning : The interaction between wheel and rail is the predominant source of noise emission from railway operations in a wide range of conventional speeds. On the one hand, this wheel/rail noise concerns rolling noise and impact noise caused by the vertical interaction excited by roughness and discrete irregularities of the wheel/rail running surfaces, respectively. LÄS MER

  4. 4. Towards the Identification of Wheel-Rail Contact Forces

    Författare :Hamed Ronasi; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; regularization; optimization; input estimation; load identification; inverse problems;

    Sammanfattning : The accurate determination of the contact forces between rail and wheel is essential inthe analysis of different kinds of rolling contact fatigue. As the contact forces cannot bemeasured directly in the field, one approach is to measure the strain at certain positionsof an instrumented wheel. LÄS MER

  5. 5. Inverse Identification of Dynamic Wheel-rail Contact Forces

    Författare :Hamed Ronasi; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; inverse problems; sensitivity; optimization; regularization; railway mechanics; input estimation; load identification;

    Sammanfattning : Accurate evaluation of contact forces between wheel and rail is essential in the assessmentof vehicle performance and to predict consequences of dynamic vehicle-track interaction.As the contact forces can not be measured directly in the field, one common approachis to measure the strain or acceleration at various positions on a wheel or wheel axle. LÄS MER