Sökning: "wear resistance"
Visar resultat 11 - 15 av 149 avhandlingar innehållade orden wear resistance.
11. The early stage of galling
Sammanfattning : In sheet metal forming (SMF) of materials such as stainless steels there is a major problem with transfer and accumulation of sheet material to the metal forming tool surface. The problem is known as galling; a kind of severe adhesive wear, which results in severe scratching of produced parts. LÄS MER
12. Synthesis, Characterization, and Evaluation of Ag-based Electrical Contact Materials
Sammanfattning : Ag is a widely used electrical contact material due to its excellent electrical properties. The problems with Ag are that it is soft and has poor tribological properties (high friction and wear in Ag/Ag sliding contacts). LÄS MER
13. Lubrication mechanism of hydrocarbon-mimicking ionic liquids
Sammanfattning : Lubrication is critical in order to achieve high efficiency and reliability of machine elements such as gears, bearings, and other moving mechanical assemblies (MMA). In space applications, tribological properties of lubricants are quickly growing more important. LÄS MER
14. Microstructure and Wear of CVD Coatings used in Metal Cutting Applications
Sammanfattning : This thesis is concerned with the microstructural characterisation of wear resistant Al2O3 and Ti(C,N)coatings produced by chemical vapour deposition on cemented carbide cutting tools. The investigation focuses on the effect of deposition conditions on the microstructure and the microstructural evolution of the coatings during heat-treatments and metal cutting. LÄS MER
15. Road Surface and Tyre Interaction : Functional Properties affecting Road Dust Load Dynamics and Storage
Sammanfattning : Luftburna partiklar (PM) är ett problem för människans hälsa, där flertalet samband mellan negativa hälsoeffekter finns mellan luftföroreningar finns, bland annat för respiratoriska sjukdomar, lungcancer och kardiovaskulära sjukdomar med flera. I länder där dubbdäck används, till exempel Sverige, Finland och Norge, och sandning av vägar och gator genomförs vintertid för att säkerställa god friktion kommer en betydande andel av partiklarna från vägslitage och nedkrossning av sand vilket bidrar till PM10. LÄS MER