Sökning: "vane"

Visar resultat 1 - 5 av 55 avhandlingar innehållade ordet vane.

1. 1. Vane applications and vane induced flow

   Författare :Fredrick Marelius; KTH; []
   Nyckelord :vane; erosion; shore protection; vortex; scour; ;

   Sammanfattning : Vanes are essentially small aspect ratio foils used forguiding sediment, by means of affecting the flow features. Theyare usually placed on the river bed and aligned with an angleof attack to the approach flow, thereby inducing a secondaryflow component that is used for guiding sediment in a desireddirection. LÄS MER

3. 2. Turbine Outlet Guide Vane Flows

   Författare :Johan Hjärne; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Spalart-Allmaras model; k-ω SST model; linear cascade; secondary flows; turbine exhaust casing; RSM; k-ε realizable model; turbine rear frame; engine mount bump; tail bearing housing; Outlet guide vane;

   Sammanfattning : New design goals on modern jet engines often leads to more highly loaded turbines with fewer stages in order to save weight and cost. This gives higher swirl angles into the outlet guide vane (OGV), implying a more difficult aerodynamic design. LÄS MER

4. 3. Investigations of Heat Transfer and Fluid Flow in the Pocket Region of a Gas Turbine Engine and Cooling of a Turbine Blade

   Författare :Jian Liu; Värmeöverföring; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; pocket cavity; symmetric vane; Liquid Crystal Thermography; truncated ribs; staggered arrangement; perforated ribs; secondary flows; endwall film cooling; leading edge; turbine vane; coolant coverage;

   Sammanfattning : In the present work, heat transfer within gas turbine applications are investigated bothexperimentally and numerically. The main content concerns heat transfer and fluidflow over the pocket region and cooling of a turbine blade. LÄS MER

5. 4. Aerodynamic Investigation of Leading Edge Contouring and External Cooling on a Transonic Turbine Vane

   Författare :Ranjan Saha; Torsten Fransson; Jens Fridh; Tony Arts; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; gas turbine; aerodynamics; secondary flow; external cooling; trailing edge cooling; film cooling; aerodynamic loss; high pressure turbine; nozzle guide vane; Aerospace Engineering; Flyg- och rymdteknik; Energiteknik; Energy Technology;

   Sammanfattning : Efficiency improvement in turbomachines is an important aspect in reducing the use of fossil-based fuel and thereby reducing carbon dioxide emissions in order to achieve a sustainable future. Gas turbines are mainly fossil-based turbomachines powering aviation and land-based power plants. LÄS MER

7. 5. Aerothermal Experimental Investigation of LPT-OGVs

   Författare :Borja Rojo; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Experimental; Turbine Rear Structure; Aerodynamics; Wind Tunnel; CFD; Gas Turbine; Engine Exit Structure; Outlet Guide Vane; Heat transfer.; Turbine Exhaust Case; Turbine Rear Frame; Exit Guide Vane;

   Sammanfattning : This thesis presents the design, commissioning, and experimental data of a newly built turbine facility at Chalmers University of Technology for investigating the ow in the engine exit structure (EES). The EES is the structure located downstream of the lowpressure turbine (LPT) in a jet engine. LÄS MER