Sökning: "validering av simuleringar"
Visar resultat 1 - 5 av 12 avhandlingar innehållade orden validering av simuleringar.
1. Validating User Engagement and Effectiveness of Training Simulations : A mixed-methods approach informed by embodied cognition and psychophysiological measures
Sammanfattning : Simulation-based training has gained widespread attention recently as a response to drawbacks associated with traditional training approaches, such as high training costs (instructors, equipment, etc.), high risks (e.g. pilot training), and ethical issues (e. LÄS MER
2. Concepts for hot sheet metal forming of titanium alloys
Sammanfattning : To increase the competitiveness of the Swedish aero engine industry alternative manufacturing methods for load carrying aero engine structures are desired, in order to reduce product cost and enable weight reduction and thereby fuel consumption. Traditionally, these structures mainly consist of large-scaled single castings of e.g. LÄS MER
3. Thermo-mechanical Assessment of Reactor Pressure Vessels of Light Water Reactors During Severe Accidents
Sammanfattning : The reactor pressure vessel (RPV) is one of the crucial safety barriers designed to isolate the reactor core, safeguarding against potential radioactive releases into the environment during a severe accident. The assessment of RPV behaviour and its failure is necessary to predict the characteristics of melt release into the reactor pit and succeeding ex-vessel accident progression. LÄS MER
4. Wings, turbulent boundary layers and flow separation
Sammanfattning : The present doctoral thesis investigates the turbulent flow developing around wing sections, focusing on the impact of adverse-pressure-gradient (APG) conditions on turbulent boundary layers (TBLs) and the physics of flow separation. Both experimental and numerical methods are employed to generate high-fidelity data sets and provide an in-depth analysis of the flow. LÄS MER
5. Numerical Investigations on Debris Bed Coolability and Mitigation Measures in Nordic Boiling Water Reactors
Sammanfattning : This thesis is aiming at coolability assessment of particulate debris beds formed in hypothetical severe accidents of Nordic boiling water reactors (BWRs) which may employ either lower drywell flooding or control rod guide tubes (CRGT) cooling as severe accident management strategies. For this purpose, quench and cooling limit (dryout) of debris beds after their formation from fuel coolant interactions were investigated by numerical simulations using the MEWA code. LÄS MER