Sökning: "uphill teeming"

Hittade 3 avhandlingar innehållade orden uphill teeming.

  1. 1. Some Aspects of Improving Initial Filling Conditions and Steel Cleanliness by Flow Pattern Control Using a Swirling Flow in the Uphill Teeming Process

    Författare :Zhe Tan; Pär Jönsson; Ersson Mikael; Stein Tore Johansen; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; uphill teeming; ingot casting; flow pattern; swirl blade; TurboSwirl; realizable k-ε model; CFD.;

    Sammanfattning : The flow pattern has widely been recognized to have an impact on the exogenous non-metallic inclusion generation in the gating system and mold flux entrapment in the uphill teeming process. Thus, a well-controlled flow pattern during the teeming process can improve the quality of ingots and further increase the yield during steel production. LÄS MER

  3. 2. A study of mold flux entrapment and gas entrainment in an ingot casting process

    Författare :Jun Yin; Mikael Ersson; Pär Jönsson; Yogeshwar Sahai; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Mold flux entrapments; CFD; Gas entrainment; Ingot casting process; Uphill teeming process; Side teeming process; Numerical simulation; Non-metallic inclusions; Metallurgical process science; Metallurgisk processvetenskap; Materials Science and Engineering; Teknisk materialvetenskap;

    Sammanfattning : The focus of this work is to study the gas entrainment and mold flux entrapments during the ingot filling process based on physical and numerical modelling.The formation of the free surface was investigated in the uphill teeming method, which illustrates a dynamic change at a quasi-steady state. LÄS MER

  4. 3. Modeling of Initial Mold Filling in Uphill Teeming Process Considering a Trumpet

    Författare :Zhe Tan; Pär Jönsson; Robert Eriksson; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; gating system; uphill teeming; ingot casting; swirl blade; flow pattern; realizable k-ε model; CFD; mathematical modeling.;

    Sammanfattning : The flow pattern in the uphill teeming process has been found to be closely related to the quality of ingots and further to affect the yield of ingot production, which is crucial for the steel making process. The formation of non-metallic inclusion and entrapment of mold flux has been considered to be affected by the flow pattern in the gating system and molds by many previous researchers. LÄS MER