Sökning: "tunnel engineering"
Visar resultat 1 - 5 av 216 avhandlingar innehållade orden tunnel engineering.
1. Differential railway track settlement in a transition zone – Field measurements and numerical simulations
Sammanfattning : In a transition zone between two different railway track forms, there is a discontinuity in track structure leading to a gradient in track stiffness. Examples include transitions between different superstructures, e.g., slab track to ballasted track, and/or between different substructures, e. LÄS MER
2. Direct Write Technology of SIN Tunnel Junctions for Thermometry and Microwave Devices
Sammanfattning : This thesis concerns development of SIN junction technology for thermometry and microwave detectors, as well as technology of a planar phase switch as a part of integratedmicrowave receiver.Cold-Electron Bolometer (CEB) is a sensitive detector of a microwave radiation, in which SIN tunnel junctions are used for temperature measurement of a nanoscale absorber in thesame way as in SIN thermometers. LÄS MER
3. Active Flow Control for Reducing Drag on Trucks: from Concept to Full Scale Testing
Sammanfattning : There is no doubt that road vehicle transportation is needed to improve efficiency, to reduce power consumption and to contribute to a sustainable mobility. Aerodynamics plays a crucial role in this, and its optimization can have a significant impact on fuel efficiency. LÄS MER
4. On reliability-based design of rock tunnel support
Sammanfattning : Tunneling involves large uncertainties. Since 2009, design of rock tunnels in European countries should be performed in accordance with the Eurocodes. The main principle in the Eurocodes is that it must be shown in all design situations that no relevant limit state is exceeded. LÄS MER
5. Reliability-based design of rock tunnel support
Sammanfattning : Since 2009, design of rock tunnels can be performed in accordance with the Eurocodes, which allows that different design methodologies are applied, such as design by calculation or design using the observational method. To account for uncertainties in design, the Eurocode states that design by calculation should primarily be performed using the partial factor method or reliability-based methods. LÄS MER