Sökning: "timber engineering"
Visar resultat 11 - 15 av 195 avhandlingar innehållade orden timber engineering.
11. Numerical Analysis of Moisture-Related Distortion in Sawn Timber
Sammanfattning : A 3D theory for the numerical simulation of deformations and stresses in wood during moisture variation is described. The constitutive model employed assumes the total strain rate to be the sum of the elastic strain rate, the moisture-induced strain rate, the mechano-sorption strain rate and the creep strain rate. LÄS MER
12. Timber Pile-Supported Embankments : Arching and Reinforcement
Sammanfattning : Reduced climate impact is a worldwide strive today. The foundation engineering industry is continuously searching for more sustainable solutions to reduce resource usage and pollutions directly or indirectly. One such solution is timber piling, as an alternative to the commonly used concrete and steel piles. LÄS MER
13. Stress-laminated-timber bridge decks subjected to ultimate loads
Sammanfattning : Stress-laminated-timber (SLT) bridge decks are a satisfactory alternative to conventional short-span bridges in terms of cost and performance. SLT decks are made from several deck laminations positioned side by side. LÄS MER
14. Moisture Transport and Moisture-Induced Distortions in Timber - an Experimental and Numerical Study
Sammanfattning : Timber products subjected to climatic variations commonly display moisture-induced distortions that can lead to serious problems for end-users. The aim of the thesis, which consists of an extended summary and six appended papers, was to investigate the potential of using the gluing technique suggested here for dealing with problems of moisture-induced distortions and developing the heat and mass transfer models which such distortion analyses require. LÄS MER
15. Moisture Conditions in Exterior Wooden Walls and Timber During Production and Use
Sammanfattning : Thermal insulation of building envelopes has improved over the years. This means that building envelope have become more susceptible to defects, with an increased risk of moisture damage. The criteria for energy consumption have become more rigorous, but the shift should not lead to moisture problems. LÄS MER