Avancerad sökning

Visar resultat 1 - 5 av 8 avhandlingar som matchar ovanstående sökkriterier.

  1. 1. Nonlinear dynamic analysis of vertical rotors with tilting pad journal bearings

    Författare :Gudeta Benti; Jan-Olov Aidanpää; Rolf Gustavsson; Roland Larsson; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; vertical rotor; tilting pad journal bearing; stiffness; damping; Machine Design; Maskinkonstruktion;

    Sammanfattning : .... LÄS MER

  3. 2. Thermo-Elasto-Hydrodynamic lubrication modeling of Tilting Pad Journal Bearings

    Författare :Philip Croné; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Machine Elements; Maskinelement;

    Sammanfattning : The journal bearing is a critical machine element typically used to support rotating motion in high speed machinery. Through the generation of a hydrodynamic pressure in its thin lubricant film,which is usually in the order of 10-100μmthick depending on the diameter of the journal itself, the bearing is able to withstand large loads, both statically and dynamically, while having a very low rate of wear. LÄS MER

  4. 3. Journal bearing design, lubrication and operation for enhanced performance

    Författare :Gregory F Simmons; Rob Dwyer-Joyce; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Maskinelement; Machine Elements;

    Sammanfattning : The increasing introduction of intermittent power sources combined with the de-regulation of electricity markets has led to increased instability in the electrical grid. This has led to increased start-up and shutdown of regulating power sources such as hydro-electric power plants and operation at non-ideal operating states both of which increase the wear and tear on machines. LÄS MER

  5. 4. Nonlinear Isoviscous Behaviour of Compliant Journal Bearings

    Författare :Matthew Cha; Sergei Glavatskih; Ilmar Santos; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Compliant Journal Bearings;

    Sammanfattning : Plans to shut down nuclear power plants in some European countries as well as increased electricity production by wind and solar power will increase the work load on hydroelectric power plants in the future. Also, due to the power grid regulations, hydroelectric power plants undergo more frequent start-ups and shut-downs. LÄS MER

  7. 5. Dynamic Performance and Design Aspects of Compliant Fluid Film Bearings

    Författare :Matthew Cha; Sergei Glavatskih; Kyung-Woong Kim; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Compliant bearing; dynamic performance; design aspects; Machine Design; Maskinkonstruktion;

    Sammanfattning : Due to government regulations together with health and safety reasons, there are increasing demands on reducing hazardous polluting chemicals from fossil fuel power plants. Therefore, more efforts are imposed on using renewable resources such as water, wind, solar and tide to produce clean/green electricity. LÄS MER