Sökning: "ti-c"
Visar resultat 1 - 5 av 20 avhandlingar innehållade ordet ti-c.
1. Atom probe microanalysis of a cermet for cutting tool applications
Sammanfattning : .... LÄS MER
2. Cutting Edge Titanium-based CVD Hard Coatings
Sammanfattning : Modern tools for metal cutting applications, such as turning or milling, are typically improved with a thin protective coating. Despite being only a few microns thick, the coating can increase the lifetime of the tool by more than 100 times compared to an uncoated tool. Two different types of techniques are normally used to deposit the coatings, i. LÄS MER
3. The relation between microstructure and mechanical properties of cobalt- and nickel-rich Co-Ti-C and Ni-Ti-C alloys
Sammanfattning : Age-hardening processes up to l000°c which might be important in the binder phase of the Co-Ti-C and Ni-Ti-Chard metal systems have been studied mainly by high voltage electron microscopy, (HVEM), optical microscopy (OM) and scanning electron microscopy (SEM) as well as by micro-and macrohardness measurements and tensile testing at room and elevated temperatures (500°-800°). In addition,the allotropic transformation of cobalt has been followed by X-ray diffraction in order to permit a more complete interpretation of the changes in microstructure reflected in the mechanical testing. LÄS MER
4. Development of Cermet Microstructures during Sintering and Heat-Treatment
Sammanfattning : The work presented in this thesis is concerned with the microstructure of Ti(C, N) based cermet materials used in cutting tool applications. Several techniques have been used to study the microstructure of cermets, in particular transmission electron micro-scopy in combi-na-tion with energy dispersive X-ray analysis and electron energy-loss spectroscopy, energy-filtered transmission electron micro-scopy, atom-probe field-ion microscopy and scanning electron microscopy. LÄS MER
5. Microstructure of Cermets
Sammanfattning : The microstructure of several TiC-TiN-Mo2C-WC-Co/Ni model alloys and a commercial (Ti,Ta,W,Mo)(C,N)-(Co,Ni) type cermet was studied using x-ray diffraction, optical microscopy, scanning electron microscopy, analytical electron microscopy and atom probe field ion microscopy. In addition thermodynamical calculations were made in order to understand the development of the microstructure during sintering. LÄS MER