Sökning: "thermoset resin"

Visar resultat 11 - 15 av 20 avhandlingar innehållade orden thermoset resin.

  1. 11. Thermoset polymers and coatings subjected to high compressive loads

    Författare :Daniel Ståhlberg; KTH; []
    Nyckelord :;

    Sammanfattning : This study describes the mechanical response of thermosetpolymers under high compressive loads. The study is dividedinto two parts. One part is focusing on the behaviour of apowder coating when used in a clamping force joint and how theproperties varies when varying the physical structure of thecoating. LÄS MER

  3. 12. Bio-based Composites from Soybean Oil Thermosets and Natural Fibers

    Författare :Kayode Adekunle; Högskolan i Borås; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; bio-based thermoset resins; natural fibres; hybrid composites; renewable resources; mechanical analysis; compression molding; lyocell fiber; Energi och material; Resursåtervinning; Resource Recovery;

    Sammanfattning : In order to reduce over-dependency on fossil fuels and to create an environment that is free of non-degradable plastics, and most importantly to reduce greenhouse gas emission, bio-based products are being developed from renewable resources through intense research to substitute conventional petrochemical-based plastics with renewable alternatives and to replace synthetic fibers with natural fibers. Many authors have done quite a lot of work on synthesizing polymers from renewable origin. LÄS MER

  4. 13. Effect of Degree of Cure on Viscoelastic Behavior of Polymers

    Författare :Sibin Saseendran; Anders Sjögren; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Polymera konstruktionsmaterial; Polymeric Composite Materials;

    Sammanfattning : Reinforced polymer composites consist of continuous fibers embedded in a polymer matrix. The matrix is usually a thermoplastic or thermosetting resin. LÄS MER

  5. 14. Development and characterisation of bast and basalt fibre hybrid polymer composites for automotive applications

    Författare :Anjum Saleem; Roberts Joffe; Högskolan i Borås; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Flax; Hemp; Kenaf; Basalt fibres; Polypropylene; Acrylic based polyester resins; Flexural; Tensile; Impact strength; Resource Recovery; Resursåtervinning;

    Sammanfattning : Natural fibres such as kenaf, hemp, and flax, also known as bast fibres, offer several benefits such as low density, low cost, carbon dioxide neutrality, sustainability and renewability. In Europe, their composites are used intensively by almost all car manufacturers, mostly in interior applications. LÄS MER

  7. 15. Effect of Degree of Cure on Viscoelastic Behavior of Polymers and their Composites

    Författare :Sibin Saseendran; Janis Varna; Anders Sjögren; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Viscoelasticty; Curing; Epoxy; Polymeric Composite Materials; Polymera konstruktionsmaterial;

    Sammanfattning : Reinforced polymer composites consist of continuous fibers embedded in a polymer matrix. The matrix is usually a thermoplastic or thermosetting resin. LÄS MER