Sökning: "thermal power"

Visar resultat 21 - 25 av 615 avhandlingar innehållade orden thermal power.

  1. 21. Thermal response test : method development and evaluation

    Författare :Signhild Gehlin; Luleå tekniska universitet; []
    Nyckelord :ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Vattenteknik; Water Resources Engineering;

    Sammanfattning : Since the first introduction of thermal response tests with mobile measurement devices in Sweden and USA in 1995, the method has developed and spread in North America and Europe. Thermal response tests have so far been used primarily for in situ determination of design data for BHE (borehole heat exchanger) systems, but also for evaluation of grout material, heat exchanger types and groundwater effects. LÄS MER

  2. 22. Design of Thermal Barrier Coating Systems

    Författare :Nicholas Curry; Chalmers University of Technology; []
    Nyckelord :Thermal Barrier Coating; Atmospheric Plasma Spraying; Thermal Conductivity; Thermocyclic Fatigue;

    Sammanfattning : Thermal barrier coatings (TBC’s) are used to provide both thermal insulation and oxidation protection to high temperature components within gas turbines. The development of turbines for power generation and aviation has led to designs where the operation conditions exceed the upper limits of most conventional engineering materials. LÄS MER

  3. 23. Prediction of power and energy use in dwellings : Addressing apects of thermal mass and occupant behaviour

    Författare :Victor Fransson; Avdelningen för Installations- och klimatiseringslära; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Byggnadssimulering; Termisk massa; Värmetröghet; boendes beteende; hushållsel; varmvatten; building simulation; thermal mass; thermal inertia; occupant behaviour; household electricity; domestic hot water;

    Sammanfattning : Households are responsible for approximately 26 % of the annual energy use in the EU. Following the EU-directives regarding energy performance in buildings, international initiatives have been taken in Europe to help countries to define and include guidelines in their own building codes, for example, to establish the concept of zero energy buildings, ZEBs. LÄS MER

  4. 24. Design of Microstructures in Thermal Barrier Coatings : A Modelling Approach

    Författare :Mohit Kumar Gupta; Per Nylén; Robert Vaβen; Högskolan Väst; []
    Nyckelord :ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; thermal barrier coatings; microstructure; thermal conductivity; Young‘s modulus; lifetime; finite element modelling; design; Manufacturing and materials engineering; Produktions- och materialteknik;

    Sammanfattning : Plasma sprayed Thermal Barrier Coating systems (TBCs) are commonly used for thermal protection of components in modern gas turbine application such as power generation, marine and aero engines. The material that is most commonly used in these applications is Yttria Stabilized Zirconia (YSZ) because of this ceramic’s favourable properties, such as low thermal conductivity, phase stability to high temperature, and good erosion resistance. LÄS MER

  5. 25. The Analysis of Thermal Power Stations and their Interaction with the Power System using Simulator Test Methods

    Författare :Jan Andersson; Chalmers University of Technology; []
    Nyckelord :thermal power station; network simulator; frequency control; island operation; turbine model;

    Sammanfattning : This thesis describes a new method of testing power stations with regard to their frequency control behaviour and analyses results obtained using this new method. The test concept is based on that the power station unit to be tested remains synchronized onto its normal strong network, whereas the frequency control behaviour is set up to be that of the conditions if the unit was working on a much smaller network, using a computer based simulator system and feeding simulated control signals to the input of the units frequency control system. LÄS MER