Sökning: "thermal diffusivity"
Visar resultat 1 - 5 av 37 avhandlingar innehållade orden thermal diffusivity.
1. Thermally Conductive High-Density Polyethylene Composites for Ground Heat Exchangers
Sammanfattning : Today, the energy used for the heating and cooling of offices, shopping centres, schools, residential areas, andother buildings is as large as 50% of the total energy consumption in the world. The climate change, globalwarming, and environmental issues have forced high requirements for energy efficiency and clean energyproduction in buildings. LÄS MER
2. Functional Performance of Gadolinium Zirconate/Yttria Stabilized Zirconia Multi-Layered Thermal Barrier Coatings
Sammanfattning : Yttria stabilized zirconia (YSZ) is the state of the art ceramic top coat material used for TBC applications. The desire to achieve a higher engine efficiency of agas turbine engine by increasing the turbine inlet temperature has pushed YSZ toits upper limit. LÄS MER
3. Experimental Studies of Thermal Diffusivities concerning some Industrially Important Systems
Sammanfattning : The main objective of this industrially important work was to gain an increasing understanding of the properties of some industrially important materials such as CMSX-4 nickel base super alloy, 90Ti.6Al.4V alloy, 25Cr:6Ni stainless steel, 0. LÄS MER
4. Investigations of the Kinetics of Reduction and Reduction/Carburization of NiO-WO3 Precursors
Sammanfattning : Kinetic studies of reduction of the mixtures of NiO and WO3 having different Ni/(Ni+W) molar ratios in flowing hydrogen gas were investigated by means of Thermo Gravimetric Analysis (TGA), Fluidized Bed (FB) technique as well as Thermal diffusivity measurements under isothermal conditions. In the case of TGA, the reaction progress was monitored by mass loss, while evolved gas analysis by a gas chromatograph was the indicator of the reaction progress in the case of FB. LÄS MER
5. Characterisation of mechanical and thermal properties of tungsten for high power spallation target applications
Sammanfattning : The European Spallation Source (ESS), which is currently under construction in Lund, will use pure tungsten as the spallation neutron target. The tungsten will be irradiated by a 2 GeV proton beam, pulsed at a repetition rate of 14 Hz. LÄS MER