Sökning: "temperature noise model"

Visar resultat 1 - 5 av 86 avhandlingar innehållade orden temperature noise model.

1. 1. Experimentally Based HFET Modeling for Microwave and Millimeter Wave Applications

   Författare :Mikael Garcia; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; MODFET; soft-breakdown; cold FET; large-signal; source balance; SDHT; dispersion; noise figure; temperature noise model; small-signal; TEGFET; direct extraction; Chalmers model; noise parameters; modeling; HEMT; HFET; noise;

   Sammanfattning : Transistor models are very important in the design of Monolithic Microwave Integrated Circuits (MMICs). Circuit simulations based on accurate transistor models are one of the keys to high circuit yield. Transistor models can also be used to trace problems in the device fabrication processes. LÄS MER

3. 2. Tread Braking of Railway Wheels - Noise-related Tread Roughness and Dimensioning Wheel Temperatures

   Författare :Tore V Vernersson; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; rail chill; block material; temperature; heat partitioning; railway; corrugation; thermoelastic analysis; tread braking; noise;

   Sammanfattning : Block braking is a commonly used braking system for freight wagons and other types of railway vehicles. One or several brake blocks are pressed against the tread (running surface) of the wheel, which is also in rolling contact with the rail. LÄS MER

4. 3. Microwave Transistor Noise Model Extraction Methods and a Non-Contacting Scattering Parameter Measurement Method

   Författare :Jörgen Stenarson; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; extraction; S-parameter; noise parameter; vector network analyzer; electro-magnetic probe; microwave; non-contacting testing; transistor noise model; VNA; EM-probe; non-invasive testing;

   Sammanfattning : This thesis has two parts. The first part discuss noise model extraction methods for FETs. The second part describe theory and implementation of a non-contacting S-parameter measurement method. Noise is an important aspect for a circuit designer, because noise generated in the circuit is a sensitivity limiting factor. LÄS MER

5. 4. Fluctuations in Mesoscopic Constrictions

   Författare :Jan Peter Hessling; Chalmers tekniska högskola; []
   Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; low frequency; fluctuations; quantum; noise; 1 f-noise; superconductivity; impurity; point contact; Andreev reflection; shot noise;

   Sammanfattning : In normal and superconducting quantum point contacts there are several sources of fluctuations. Thermally activated impurities in the vicinity of the junction cause the current (or voltage) to change with a typical frequency of the order of one Hz up to a few kHz. LÄS MER

7. 5. Model-Based Optimization of Combustion-Engine Control

   Författare :Gabriel Turesson; Institutionen för reglerteknik; []
   Nyckelord :Model Predictive Control MPC ; Partially Premixed Combustion; Pressure Sensor Feedback; Model Based Control; Particle Filter; Multiple Fuel Injections; Gasoline Compression Ignition; Model Predictive Control MPC ; Partially Premixed Combustion PPC ; Low Temperature Combustion; Model Based Control; Multiple Fuel Injections; Pressure Sensor Feedback; Particle Filter; Gasoline Compression Ignition;

   Sammanfattning : The work presented in this thesis is motivated by the need to reliably operate a compression-ignition engine in a partially premixed combustion (PPC) mode. Partially premixed combustion is a low temperature combustion concept, where the ignition delay is prolonged to enhance fuel-air mixing in the combustion chamber before the start of combustion. LÄS MER