Sökning: "temperature control"
Visar resultat 11 - 15 av 984 avhandlingar innehållade orden temperature control.
11. Aging sensitive battery control
Sammanfattning : The battery is a component with significant impact on both the cost and environmental footprint of a full electric vehicle (EV). Consequently, there is a strong motivation to maximize its degree of utilization. Usage limits are enforced by the battery management system (BMS) to ensure safe operation and limit battery degradation. LÄS MER
12. Quality Control of a Newsprint TMP Refining Process based on Refining Zone Temperature Measurements
Sammanfattning : The ultimate goal of this study was to examine the possibility of using temperature measurements for control purposes in a TMP refining process. The study was carried out in a commercial refiner line at Holmen Paper’s Hallsta Mill, were the primary stage refiner was equipped with temperature sensors. LÄS MER
13. Development and evaluation of methods for control and modelling of multiple-input multiple-output systems
Sammanfattning : In control, a common type of system is the multiple-input multiple-output (MIMO) system, where the same input may affect multiple outputs, or conversely, the same output is affected by multiple inputs. In this thesis two methods for controlling MIMO systems are examined, namely linear quadratic Gaussian (LQG) control and decentralized control, and some of the difficulties associated with them. LÄS MER
14. Dryer Section Control in Paper Machines During Web Breaks
Sammanfattning : Web breaks in the dryer section of a paper machine cause loss of production and quality problems. After a web break, the steam pressure in the cylinders must be reduced to avoid overheating. LÄS MER
15. Learning-based Control for 4D Printing and Soft Robotics
Sammanfattning : Exploiting novel sensors and actuators made of flexible and smart materials becomes a new trend in robotics research. The studies on the design, production, and control of the new type of robots motivate the research fields of soft robots and 4D printed robots. LÄS MER