Sökning: "technology engineering mechanics fluid mechanics"

Visar resultat 1 - 5 av 1007 avhandlingar innehållade orden technology engineering mechanics fluid mechanics.

  1. 1. Large-Eddy Simulation of Gasoline Fuel Spray Injection at Ultra-High Injection Pressures

    Författare :Sandip Wadekar; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; LES; High pressure fuel injection; spray-wall interaction; spray-turbulence interaction; GDI engine; Spray modeling;

    Sammanfattning : Gasoline direct injection is a state-of-the-art technique that reduces hydrocarbon and particulate emissions. However, further improvement is needed to meet current as well as future emission regulations. LÄS MER

  3. 2. Thermal insulation of the combustion chamber in a light duty diesel engine

    Författare :Joop Somhorst; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; temperature swing; crevice effect.; porosity; heat transfer; surface roughness; efficiency; diesel engine; surface sealing; thermal barrier coating;

    Sammanfattning : Reduction of heat loss from the combustion chamber in an engine has great potential to decrease fuel consumption and CO2 emissions. Research on thermal barrier coatings (TBC) has been performed since the early eighties to address this potential. LÄS MER

  4. 3. Spray combustion with multiple-injection in modern engine conditions

    Författare :Ahmad Hadadpour; Strömningsteknik; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Spray combustion; Multiple-injection; Internal combustion engine; LES; FGM; ESF;

    Sammanfattning : Combustion of fuel in diesel engines emits substances harmful to the environment such as soot. These emissions can be reduced by either in-cylinder treatments or after-treatments. One of the common in-cylinder treatments is multiple-injection, which divides a single fuel injection to multiple smaller injections. LÄS MER

  5. 4. On the Analysis of Energy Efficient Aircraft Engines

    Författare :Oskar Thulin; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Performance modelling; Aero engine; Turbofan; Aircraft engine; Installed propulsion; Ultra high bypass ratio; Exergy analysis; Engine weight estimate; Variable area fan nozzle; Multiple pivoting flaps; Translating cowls;

    Sammanfattning : Aero engine performance analysis is highly multidimensional using various measures of component performance such as turbomachinery and mechanical efficiencies, and pressure loss coefficients. Using conventional performance analysis, relying on only the laws of thermodynamics, it is possible to understand how the performance parameters affect the component performance, but it is difficult to directly compare the magnitude of various loss sources. LÄS MER

  7. 5. Integration of Surface Acoustic Wave and Microfluidic Technologies for Liquid-Phase Sensing Applications

    Författare :Kiryl Kustanovich; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; IDE; Resonator; SH-SAW; Impedance Spectroscopy; Surface Acoustic Wave; PDMS; LiNbO3; Microfluidics; Sensor;

    Sammanfattning : This thesis discusses a new concept for construction of a novel SAW in-liquid sensor employing surface acoustic wave resonance (SAR) in a one-port configuration. In this concept, the reflective gratings of a one-port SAW resonator are employed as mass loading-sensing elements, while the SAW transducer is protected from the measurement environment, reducing power losses significantly. LÄS MER