Sökning: "synchronous machine"

Visar resultat 1 - 5 av 81 avhandlingar innehållade orden synchronous machine.

  1. 1. Synchronous Machines with High-Frequency Brushless Excitation for Vehicle Applications

    Författare :Junfei Tang; Chalmers University of Technology; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Machine Design; Electrically Excited Synchronous Machines; Brushless Excitation; Machine Modeling; Electric Vehicles; Machine Control;

    Sammanfattning : Abstract Electrically excited synchronous machines (EESM) are becoming an alternative to permanent magnet synchronous machines (PMSM) in electric vehicle (EV) applications. This mainly attributes to the zero usage of rare-earth material as well as the capabilities of high starting torque and good field weakening provided by EESM. LÄS MER

  2. 2. Electrical Machine Development : a study of four different machine types from Swedish perspective

    Författare :Sture Eriksson; Chandur Sadarangani; Konrad Reichert; KTH; []
    Nyckelord :ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Electronic measurement and instrumentation; Elektronisk mät- och apparatteknik;

    Sammanfattning : Development and manufacturing of rotating electrical machines have been essential for the Swedish society and industry for more than a century. The dominating manufacturer has been Asea/ABB, even if a more diversified structure has emerged in recent years. LÄS MER

  3. 3. Analysis and control of magnetic forces in synchronous machines

    Författare :J. J. Pérez-Loya; Urban Lundin; Anouar Belahcen; Uppsala universitet; []
    Nyckelord :eccentricity; electromagnetics; electromagnetic forces; excitation; magnetic fields; magnetic forces; magnetic thrust bearing; rotor drive; split rotor; starting; synchronous generators; synchronous machines; synchronous motors; unbalanced magnetic pull; Engineering Science with specialization in Science of Electricity; Teknisk fysik med inriktning mot elektricitetslära;

    Sammanfattning : In a synchronous machine, radial, tangential, and axial forces are generated. In this thesis, three different technologies to control them are proposed. The first one, involves the utilization of the radial forces that arise between the rotor and the stator. LÄS MER

  4. 4. Synchronous Reluctance Machine (SynRM) in Variable Speed Drives (VSD) Applications

    Författare :Reza Rajabi Moghaddam; Chandur Sadarangani; Alfredo Vagati; KTH; []
    Nyckelord :ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Synchronous Reluctance Machine SynRM ; Torque; Torque Ripple; Design; Optimization; FEM; Control; Standard Size; Measurement; Performance Comparison; Induction Machine IM ; Interior Permanent Magnet Machine IPM ; Variable Speed Drive VSD ; General Purpose GP ; Field Oriented Control FOC ; Direct Torque Control DTC ; Heat Run; Test; Thermal; Operation Diagram; Circle Diagram; Electrical engineering; Elektroteknik;

    Sammanfattning : This thesis is comprehensively dedicated to the theoretical and experimental reevaluation of the Synchronous Reluctance Machine (SynRM). A simple approach to derive the SynRM main characteristics and behavior is followed. An introduction to an evaluation of the different control strategies in is given. LÄS MER

  5. 5. Comparison of Different Electrical Machines for Belt-driven Alternator and Starter

    Författare :Dan Hagstedt; Industriell elektroteknik och automation; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Belt-driven Alternator and Starter; Permanently Magnetised Synchronous Machine; Electrically Magnetised Synchronous Machine; Series Magnetisation Synchronous Machine; Hybrid Magnetised Synchronous Machine;

    Sammanfattning : This thesis focuses on the electromagnetic design of a synchronous machine suited for a belt-driven alternator and starter (BAS) in a micro hybridisation of a mid-size passenger car. The BAS needs to provide a high cranking torque to start the combustion engine, especially in a cool condition where the requirements are highest. LÄS MER