Sökning: "surface treatments"

Visar resultat 11 - 15 av 266 avhandlingar innehållade orden surface treatments.

  1. 11. Preparation and Properties of Surface Modified Thin Polymer Films

    Författare :Sofia Kihlman Øiseth; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; aminodextran; plasma polymerisation; polymer films; high-density polyethylene HDPE ; UV ozone treatment; surface modification; glow discharge plasma; in situ control; spin coating;

    Sammanfattning : This thesis deals with preparation, modification and characterisation of thin polymer films. Most of the work has been performed using thin films of high-density polyethylene (HDPE) as a model system for systematic surface modifications by glow discharge plasma and UV/ozone treatments. LÄS MER

  3. 12. Low-temperature carburizing/nitriding of austenitic stainless steels - Influence of alloy composition on microstructure and properties

    Författare :Giulio Maistro; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; tribology; surface engineering; S-phase; SEM; corrosion; XPS; Austenitic stainless steel; expanded austenite; plasma nitriding; EBSD; XRD; thermal stability; low-temperature carburizing; surface analysis; GDOES;

    Sammanfattning : Austenitic stainless steels are among the most used materials in applications where corrosion resistance is important, as the food, pharmaceutical, chemical, oil and gas industries. However, low hardness and poor tribological properties is often an obstacle for their applicability. LÄS MER

  4. 13. Microstructural Characterization of Expanded Austenite in 304L and 904L Austenitic Stainless Steels

    Författare :Giulio Maistro; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; low-temperature thermochemical treatment; S-phase; SEM; thermal stability; surface engineering; surface analysis; EBSD; XRD; austenitic stainless steel; XPS; GDOES; Expanded austenite;

    Sammanfattning : Austenitic stainless steels are among the most used materials in modern industry, mainly because of their superior corrosion resistance. However, low hardness and poor tribological properties often restrict their applicability. LÄS MER

  5. 14. Modeling of Intraluminal Surfaces of Thoracic Aortas

    Författare :Johan Bondesson; Chalmers tekniska högskola; []
    Nyckelord :MEDICIN OCH HÄLSOVETENSKAP; MEDICAL AND HEALTH SCIENCES; MEDICIN OCH HÄLSOVETENSKAP; MEDICAL AND HEALTH SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; aneurysm; TEVAR; bird-beaking; cardiac pulsatility; geometric modeling; surface curvature; endograft; stereolithographic surface; dissection; Thoracic aorta;

    Sammanfattning : Vascular diseases are getting more and more common as a result of modern-day lifestyle and the fact that the population is getting older. One of the newest treatments for vascular diseases such as aneurysms and dissections is endovascular repair with endografting. LÄS MER

  7. 15. Managing Effects of Manufacturing Variation in Dental Medical Device Treatments - Increasing Geometrical Robustness

    Författare :Timo Kero; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; MEDICIN OCH HÄLSOVETENSKAP; MEDICAL AND HEALTH SCIENCES; mass customization and dentistry.; medical devices; virtual verification; Robust design; variation simulation; tolerance analysis;

    Sammanfattning : Today, there are many solutions for dental rehabilitation. A damaged tooth can be replaced with a dental crown, and a toothless patient can be rehabilitated with implants and a corresponding bridge set-up. Traditionally, a dental crown is manufactured by veneering porcelain to a metal surface that is obtained through the use of casting principles. LÄS MER