Sökning: "surface segregation"

Visar resultat 16 - 20 av 87 avhandlingar innehållade orden surface segregation.

  1. 16. Thin Film and Plasma Characterization of PVD Oxides

    Författare :Ludvig Landälv; Per Eklund; Emmanuelle Göthelid; Björn Alling; Lars Hultman; Erik Lewin; Linköpings universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES;

    Sammanfattning : The state-of-the-art tools for machining metals are primarily based on a metal-ceramic composite(WC-Co) coated with different combinations of carbide, nitride and oxide coatings. Combinations of these coating materials are optimized to withstand specific wear conditions. LÄS MER

  3. 17. Modeling and Simulation of Weld Hot Cracking

    Författare :Joar Draxler; Lars-Erik Lindgren; Jonas Edberg; Paul Åkerström; Jesper Hattel; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Material Mechanics; Materialmekanik;

    Sammanfattning : Several alloy systems are susceptible to weld hot cracking. Weld hot cracking occurs by fracture of liquid films, normally grain boundary liquid films, at the late stage of the solidification of the weld. The cracks can be small and therefore difficult to detect by nondestructive test methods. LÄS MER

  4. 18. Mechanical Properties, Microstructures and Defects of Tool Steels Fabricated by Additive Manufacturing

    Författare :Yuan Miwen; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Additive manufacturing; Carbides; Post heat treatment; Directed energy deposition; Softening resistance; Pores; Laser beam powder bed fusion; Solidification cracking; Tool steels;

    Sammanfattning : Additive Manufacturing (AM) has been gaining significant interest in the manufacturing of metallic materials in the recent years. From a techno-commercial standpoint, tooling is one of the areas with low production volumes but very high demands on part performance and complexity in design, all of which are characteristic for metal AM. LÄS MER

  5. 19. Physical vapor deposition and thermal stability of hard oxide coatings

    Författare :Ludvig Landälv; Per Eklund; Emmanuelle Göthelid; Björn Alling; Marcus Morstein; Linköpings universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY;

    Sammanfattning : The state-of-the-art tools for machining metals are primarily based on a metal-ceramic composite (WC-Co) coated with different combinations of carbide, nitride, and oxide coatings. Combinations of these coating materials are optimized to withstand specific wear conditions. LÄS MER

  7. 20. Microstructure Evolution and Mechanical Properties of Haynes 282

    Författare :Ceena Joseph; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; gamma prime; carbide stabilization treatment; heat treatment; Haynes 282; isothermal transformation; anisotropy ductility; solution treatment; carbides; microstructure;

    Sammanfattning : Precipitation-hardened nickel-based superalloys find wide applications in aero engines and land-based gas turbines due to a combination of properties such as high temperature strength, resistance to oxidation and corrosion, fabricability, and creep strength. Structural engine components are traditionally cast to achieve higher degree of geometrical design freedom. LÄS MER