Sökning: "steel powder"
Visar resultat 1 - 5 av 117 avhandlingar innehållade orden steel powder.
1. The Effects of Morphology and Surface Oxidation of Stainless Steel Powder in Laser Based-Powder Bed Fusion
Sammanfattning : Laser based-powder bed fusion (LB-PBF) is one of the many techniques within additive manufacturing (AM) that allows for near net shape manufacturing of metallic components. By using powder feedstock, it is possible to spread thin layers of powder and further selectively fuse powder in a repetitive manner until the component is completed. LÄS MER
2. Aspects of building geometry and powder characteristics in powder bed fusion
Sammanfattning : Additive manufacturing (AM) produces near-net-shaped parts directly from a 3D-CAD model in a layer-by-layer manner. One of the most common AM technique for fabricating metallic components is powder bed fusion (PBF). The PBF process has shown great potential in fabricating metallic parts with properties better or comparable to conventional methods. LÄS MER
3. Influence of Segregants on Creep Fracture in Powder Metallurgical Martensitic Stainless Steel
Sammanfattning : This thesis deals with the behaviour of segregants in Powder Metallurgical (PM) 10%Cr steel and their impact on creep fracture. Particular interest is taken in determining the reaction products involved in creep cavitation and how these are connected to the powder surface reactions during the gas atomisation and consolidation (hot isostatic pressing). LÄS MER
4. Surface Interactions in Powder Injection Moulding
Sammanfattning : Powder Injection Moulding (PIM) is an attractive technique for producing complex components in large quantities my means of powder technology. The process includes mixing powder with a suitable binder, usually a thermoplastic polymer. Because of the large attractive forces between small particles the powder can be agglomerated in the binder. LÄS MER
5. Development of Structural Steels for Powder Bed Fusion - Laser Beam
Sammanfattning : Over the past decade, powder bed fusion – laser beam (PBF-LB) has attracted noticeable attention from both academia and industry. However, there remains a scarcity of approved material for the process, as fewer than 40 alloys are commercially available. LÄS MER