Sökning: "specific heat"
Visar resultat 11 - 15 av 462 avhandlingar innehållade orden specific heat.
11. A specific heat ratio model and compression ratio estimation
Sammanfattning : Cylinder pressure modeling and heat release analysis are today important and standard tools for engineers and researchers, when developing and tuning new engines. An accurate specific heat ratio model is important for an accurate heat release analysis, since the specific heat ratio couples the systems energy to other thermodynamic quantities. LÄS MER
12. Integrating Latent Heat Storage into Residential Heating Systems : A study from material and component characterization to system analysis
Sammanfattning : Latent heat thermal energy storage (LHTES) systems can be coupled with heat pump (HP) systems to realize heat load shifting on demand side. With phase change material (PCM), well designed LHTES components exhibit high storage energy density and thus have large potentials to be integrated in residence where a compact energy storage solution is needed. LÄS MER
13. Radiative Heat Transfer in Suspension-Fired Systems
Sammanfattning : Radiation is the dominating heat transfer mechanism in most furnaces, and the radiative properties of combustion products represent important aspects regarding its suitability as a heat source. However, fuel and energy markets are undergoing rapid changes due to increasing concerns related to the security of supply and increased global warming. LÄS MER
14. Waste Heat Driven Membrane Distillation for Industrial Wastewater Treatment
Sammanfattning : The European Union has placed a high priority on reaching the goals described in the 2030 Agenda for Sustainable Development. This aim has provided added momentum to member-state environmental regulatory authorities to further tighten the discharge limits of industrial wastewater. LÄS MER
15. Heat and Mass Transfer Investigations of Relevance for Food Engineering Applications
Sammanfattning : This thesis concerns two interrelated subjects of heat and mass transfer processes. The first one concerns mainly experimental measurements, with a subsequent development of a calculation procedure, of the thermal and hydraulic performances, experimental methods and evaluation procedures applied on various plate heat exchangers (PHEs) as evaporators with the refrigerant ammonia as working medium. LÄS MER