Sökning: "spark plasma sintering"
Visar resultat 1 - 5 av 29 avhandlingar innehållade orden spark plasma sintering.
1. Spark Plasma Sintering of Si3N4-based Ceramics : Sintering mechanism-Tailoring microstructure-Evaluationg properties
Sammanfattning : Spark Plasma Sintering (SPS) is a promising rapid consolidation technique that allows a better understanding and manipulating of sintering kinetics and therefore makes it possible to obtain Si3N4-based ceramics with tailored microstructures, consisting of grains with either equiaxed or elongated morphology. The presence of an extra liquid phase is necessary for forming tough interlocking microstructures in Yb/Y-stabilised α-sialon by HP. LÄS MER
2. Rapid sintering of ceramics by intense thermal radiation
Sammanfattning : Sintering is an important processing step for obtaining the necessary mechanical stability and rigidity of ceramic bulk materials. Both mass and heat transfer are essential in the sintering process. The importance of radiation heat transfer is significantly enhanced at high temperatures according to the well-known Stefan-Boltzmann’s law. LÄS MER
3. Spark Plasma Sintering Enhancing Grain Sliding, Deformation and Grain Size Control : Studies of the Systems Ti, Ti/TiB2, Na0.5 K0.5 NbO3, and Hydroxyapatite
Sammanfattning : The unique features of the Spark plasma sintering (SPS) were used to investigate the sintering and deformation behaviour of titanium and titanium–titanium diboride composites, and to control the sintering and grain growth of ferroelectric Na0.5K0.5NbO3 (NKN) and of hydroxyapatite (HAp). LÄS MER
4. Spark plasma sintered ZrO2-SiO2 glass ceramics and Si3N4 bioceramics
Sammanfattning : This thesis focuses on elaboration and characterization of two types of bioceramics: one is ZrO2-SiO2 nanocrystalline glass ceramic (NCGC) for dental application. The goal is to develop new ZrO2-SiO2 NCGCs with a combination of high strength and high translucency; the other is biodegradable Si3N4 ceramics for spinal fusion. LÄS MER
5. Spark Plasma Sintered 3Y-TZP/CNT composites
Sammanfattning : Composites of 3 mol% yttria-doped tetragonal zirconia (3Y-TZP) reinforced with multiwalled carbon nanotubes (MWCNT) up to 2 wt% have been produced using spark plasma sintering (SPS). The theoretical densities of the studied composites were found to be between 99.4 and 97.4 %. LÄS MER