Sökning: "solidification"
Visar resultat 16 - 20 av 167 avhandlingar innehållade ordet solidification.
16. Inclusions and/or Particles Engineering for Grain Refining Purposes in Ferritic Fe-20mass%Cr alloys
Sammanfattning : Compared to more common used austenitic stainless steels, ferritic stainless steels contain very low amounts of the expensive alloying element Ni. In addition, they have good corrosion properties, but are sometimes suffering from poor weldability and bad mechanical properties. LÄS MER
17. A Study On Factor Influencing the Microstructure and Shrinkage Porosity Formation in Compacted Graphite Iron
Sammanfattning : During the last decades, an intensive effort has been dedicated to introduce compacted graphite iron (CGI) for truck engine components as its intermediate graphite morphology provides an increased tensile property compared to lamellar cast iron (LGI) and a better thermal conductivity compared to nodular cast iron (SGI). However, the narrow production technology window in this cast iron grade requires increased technological discipline. LÄS MER
18. On the Nucleation and Inoculation of Metals
Sammanfattning : Latent heat during recalesence and nucleation and post-recalesence temperature was analysed for refractory metals. An effect on latent heat was found by alloying the pure elements with other refractories. Latent heat was found to be 15-65% of tabulated values. Interface energy was evaluated from undercooling experiments. LÄS MER
19. The role of primary austenite morphology in cast iron
Sammanfattning : Automotive industry products portfolio includes a wide variety of complex-shaped cast iron products, such as truck engine components. Urged by strict environmental regulations on emissions, these components constantly need to combine higher demands on performance with lighter designs. LÄS MER
20. Heat transfer phenomena and mould flux lubrication in continuous casting of steel
Sammanfattning : Overall thermal resistance of the mould flux was measured tomake clear the influence of the mould flux properties on theheat transfer behavior in continuous casting, especiallythermal conductivity and the formation of air gaps in thisstudy. From the investigation of the effect of the mouldsurface temperature and physical properties of the mould fluxon heat transfer through the flux film, following knowledge hasbeen obtained. LÄS MER