Sökning: "slag-metal"

Visar resultat 1 - 5 av 13 avhandlingar innehållade ordet slag-metal.

  1. 1. Study of the slag-metal interaction in ladle treatment

    Författare :Pranesh Dayal; Du Sichen; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Materials science; slag-metal; mixing; interface; induction stirring; gas stirring; ladle treatment; Materialvetenskap; Materials science; Teknisk materialvetenskap;

    Sammanfattning : .... LÄS MER

  3. 2. Slag/Metal Metallurgy in Iron and Steel Melts

    Författare :Johan Ekengård; Pär Jönsson; Attila Dioszegi; Johan Björkvall; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; austenit; syreaktivitet; slagg; fördelning; primär dendrit; metalldroppar; lamellär grafit; svavel; kompaktgrafit; skänk; nodulär grafit; raffinering; Metallurgical process science; Metallurgisk processvetenskap;

    Sammanfattning : In this work, the metal and slag phase mixing in three steps of a ladle refining operation of steel melts and for an oxygen balance during cooling of cast iron melts have been studied at two Swedish steel plants and at two Swedish cast iron foundries, respectively. In order to predict the oxygen activity in the steel bulk in equilibrium with the top slag as well as in metal droplets in the top slag in equilibrium with the top slag, three slag models were used. LÄS MER

  4. 3. Mass transfer and slag-metal reaction in ladle refining : a CFD approach

    Författare :Eva Ramström; Du Sichen; Mselly Nozotta; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; reoxidation; desulphurisation; CFD; ladle treatment; model; Other materials science; Övrig teknisk materialvetenskap;

    Sammanfattning :   In order to optimise the ladle treatment mass transfer modelling of aluminium addition and homogenisation time was carried out. It was stressed that incorporating slag-metal reactions into the mass transfer modelling strongly would enhance the reliability and amount of information to be analyzed from the CFD calculations. LÄS MER

  5. 4. A study of some aspects of gas-slag-metal interactions : Towards dynamic process model and control

    Författare :Mattias Ek; Sichen Du; Stuart Millman; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; BOF; process modeling; phosphorous capacity; penetration depth; slag foaming; mixing time; inclusion removal;

    Sammanfattning : The present thesis deals with the development of a new type of dynamic model for metallurgical reactors. It also covers some of the theoretical aspects of steelmaking that is necessary to include in such an application. The thesis consists of modeling work, high temperature experiments and cold model experiments. LÄS MER

  7. 5. Investigations of thermophysical properties of slags with focus on slag-metal interface

    Författare :Luckman Muhmood; Seshadri Seetharaman; Nurni Neelakandan Viswanathan; Allan Cramb; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; slags; density; diffusivity; sessile drop; interfacial velocity; interfacial viscosity; interfacial dilatational modulus; interfacial shear viscosity; Metallurgical process engineering; Metallurgisk processteknik;

    Sammanfattning : The objective of this research work was to develop a methodology for experimentally estimating the interfacial properties at slag-metal interfaces. From previous experiments carried out in the division, it was decided to use surface active elements like sulfur or oxygen to trace any motion at the interface. LÄS MER