Sökning: "short-term loading"

Visar resultat 1 - 5 av 29 avhandlingar innehållade orden short-term loading.

  1. 1. Mechanics of Paperboard Packages : Performance at Short Term Static Loading

    Författare :Liliana Beldie; Byggnadsmekanik; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY;

    Sammanfattning : Paper 1Several problems emerge when a paperboard package is modeled by means of the nite element method. One of the issues that one has to deal with is the constitutive model of the paperboard. Paperboard and paper in general areorthotropic materials, which means that constitutive parameters in three orthogonal directions must be determined. LÄS MER

  3. 2. Structural Behavior of Reinforced High-Strength Concrete Columns

    Författare :Christina Claeson; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; sustained loading; columns; slenderness; finite element analyses; nonlinear fracture mechanics; high-strength concrete; short-term loading; eccentricity;

    Sammanfattning : The high compressive strength of high-strength concrete is especially advantageous in compressed members such as columns, which can be made more slender and, consequently, make economic benefits possible. However, the behavior of high-strength concrete columns is not yet fully understood. LÄS MER

  4. 3. Anisotropic Mechanical Behaviours and Thin-wall Effects of Additively Manufactured Austenitic Alloys

    Författare :Cheng-Han Yu; Johan Moverare; Ru Lin Peng; Christian Leinenbach; Linköpings universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Laser powder bed fusion; Slow strain rate tensile testing; Short-term creep; Low cycle fatigue; Neutrons; Anisotropy; Crystallographic texture; Microstruc-ture; Dislocation structure; Lasersmältning i pulverbädd; Provning med långsam töjningshastighet; korttidskryp; Lågcykelutmattning; Neutroner; Anisotropi; Kristallografisk textur; Mikrostruktur; Dislokationsstruktur;

    Sammanfattning : Additive manufacturing (AM), also known as 3D printing, is a general concept of building a three-dimensional object layer-by-layer. AM breaks through the manufacturing limitations in conventionally subtractive manufacturing, leading to a great design freedom of components with complex geometries. LÄS MER

  5. 4. Strength and Moisture Aspects of Steel Timber Dowel Joints in Glulam Structures : An Experimental and Numerical Study

    Författare :Johan Sjödin; Erik Serrano; Per Johan Gustafsson; Växjö universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; constraint stresses; contact-free measurement; dowel-type joints; humidity variations; glu-lam beams; glulam structures; linear elastic fracture mechanics; moisture-induced stresses; numerical simulations; short term capacity.; Building engineering; Byggnadsteknik;

    Sammanfattning : Joints are critical parts of timber structures, transmitting static and dynamic forces between structural members. The ultimate behavior of e.g. a building depends strongly on the structural configuration and the capacity of its joints. LÄS MER

  7. 5. Anchorage in Concrete Structures : Numerical and Experimental Evaluations of Load-Carrying Capacity of Cast-in-Place Headed Anchors and Post-Installed Adhesive Anchors

    Författare :Rasoul Nilforoush; Lennart Elfgren; Norbert Randl; Karin Lundgren; Manouchehr Hassanzadeh; Richard Malm; Lars-Erik Persson; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Headed anchor; Anchor bolt; Adhesive anchor; Concrete cone breakout; Concrete splitting; Pullout loading; Size effect; Member thickness; Anchor head size; Orthogonal surface reinforcement; Concrete Strength; High-strength concrete; Cracked concrete; Steel fiber-reinforced concrete; Sustained loading; Creep behavior; Structural Engineering; Konstruktionsteknik;

    Sammanfattning : Various anchorage systems including both cast-in-place and post-installed anchors have been developed for fastening both non-structural and structural components to concrete structures. The need for increased flexibility in the design of new structures and strengthening of existing concrete structures has led to increased use of various metallic anchors in practice. LÄS MER